Jan-2024 Fortinet NSE7_SDW-7.0 Certification Real 2024 Mock Exam [Q34-Q51]

Share

Jan-2024 Fortinet NSE7_SDW-7.0 Certification Real 2024 Mock Exam

NSE7_SDW-7.0 Exam Questions and Valid PMP Dumps PDF


Fortinet NSE 7 - SD-WAN 7.0 certification exam covers a wide range of topics related to Fortinet Secure SD-WAN solutions, such as SD-WAN architecture, deployment, configuration, management, troubleshooting, and security. Fortinet NSE 7 - SD-WAN 7.0 certification exam is designed to test the candidates' hands-on experience with Fortinet Secure SD-WAN solutions and ensure that they are proficient in deploying and managing these solutions in real-world scenarios. Fortinet NSE 7 - SD-WAN 7.0 certification is an excellent way for network and security professionals to validate their skills and demonstrate their expertise in Fortinet Secure SD-WAN solutions.

 

NEW QUESTION # 34
Refer to the exhibit.

In a dual-hub hub-and-spoke SD-WAN deployment, which is a benefit of disabling the anti-replay setting on the hubs?

  • A. It instructs the hub to disable TCP sequence number check, which is required for TCP sessions originated from spokes to fail over back and forth between the hubs.
  • B. It instructs the hub to disable the reordering of TCP packets on behalf of the receiver, to improve performance.
  • C. It instructs the hub to not check the ESP sequence numbers on IPsec traffic, to improve performance.
  • D. It instructs the hub to skip content inspection on TCP traffic, to improve performance.

Answer: A


NEW QUESTION # 35
Which are two benefits of using CLI templates in FortiManager? (Choose two.)

  • A. You can configure interfaces as SD-WAN members without having to remove references first.
  • B. You can configure FortiManager to sync local configuration changes made on the managed device, to the CLI template.
  • C. You can reference meta fields.
  • D. You can configure advanced CLI settings.

Answer: C,D


NEW QUESTION # 36
Which three matching traffic criteria are available in SD-WAN rules? (Choose three.)

  • A. URL categories
  • B. Application signatures
  • C. Source and destination IP address
  • D. Internet service database (ISDB) address object
  • E. Type of physical link connection

Answer: B,C,D


NEW QUESTION # 37
Which two statements about SD-WAN central management are true? (Choose two.)

  • A. It supports normalized interfaces for SD-WAN member configuration.
  • B. The objects are saved in the ADOM common object database.
  • C. It uses templates to configure SD-WAN on managed devices.
  • D. It does not support meta fields.

Answer: B,C

Explanation:
Explanation
Normalized interfaces are not supported for SD-WAN templates. You can create multiple SD-WAN zones and add interface members to the SD-WAN zones. You must bind the interface members by name to physical interfaces or VPN interfaces.https://docs.fortinet.com/document/fortigate/7.0.0/sd-wan-new-features/794804/new-sd-wan-template-


NEW QUESTION # 38
Refer to the exhibits.

Which two conclusions for traffic that matches the traffic shaper are true? (Choose two.)

  • A. The measured bandwidth is less than 100 KBps.
  • B. The traffic shaper drops packets if the bandwidth exceeds 6250 KBps.
  • C. The traffic shaper drops packets if the bandwidth is less than 2500 KBps.
  • D. The traffic shaper limits the bandwidth of each source IP to a maximum of 6250 KBps.

Answer: A,B


NEW QUESTION # 39
Refer to the exhibits.


Which two statements about the IPsec VPN configuration and the status of the IPsec VPN tunnel are true? (Choose two.)

  • A. FortiGate does not install IPsec static routes for remote protected networks in the routing table.
  • B. Dead peer detection is disabled.
  • C. FortiGate facilitated the negotiation of the T_INET_1_0_0 ADVPN shortcut over T_INET_1_0.
  • D. The phase 1 configuration supports the network-overlay setting.

Answer: A,D


NEW QUESTION # 40
What is the route-tag setting in an SD-WAN rule used for?

  • A. To indicate the routes for health check probes.
  • B. To indicate the members that can be used to route SD-WAN traffic.
  • C. To indicate the destination of a rule based on learned BGP prefixes.
  • D. To indicate the routes that can be used for routing SD-WAN traffic.

Answer: C


NEW QUESTION # 41
Refer to the exhibit.

Based on the output shown in the exhibit, which two criteria on the SD-WAN member configuration can be used to select an outgoing interface in an SD-WAN rule? (Choose two.)

  • A. Set source 100.64.1.1.
  • B. Set load-balance-mode source-ip-ip-based.
  • C. Set cost 15.
  • D. Set priority 10.

Answer: C,D


NEW QUESTION # 42
Refer to the exhibit.

Which statement explains the output shown in the exhibit?

  • A. FortiGate must re-evaluate the session due to routing change.
  • B. FortiGate performed standard FIB routing on the session.
  • C. FortiGate will not re-evaluate the session following a firewall policy change.
  • D. FortiGate used 192.2.0.1 as the gateway for the original direction of the traffic.

Answer: A


NEW QUESTION # 43
Which CLI command do you use to perform real-time troubleshooting for ADVPN negotiation?

  • A. get ipsec tunnel list
  • B. get router info routing-table all
  • C. diagnose debug application ike
  • D. diagnose vpn tunnel list

Answer: C

Explanation:
IKE real-time debug - useful when debugging ADVPN shortcut messages and spoke-to-spoke negotiations.
* diagnose debug console timestamp enable
* diagnose vpn ike log filter clear
* diagnose vpn ike log filter mdst-addr4 <ip.of.hub> <ip.of.spoke>
* diagnose debug application ike -1
* diagnose debug enable


NEW QUESTION # 44
Which best describes the SD-WAN traffic shaping mode that bases itself on a percentage of available bandwidth?

  • A. Interface-based shaping mode
  • B. Reverse-policy shaping mode
  • C. Per-IP shaping mode
  • D. Shared-policy shaping mode

Answer: A

Explanation:
Interface-based shaping goes further, enabling traffic controls based on percentage of the interface bandwidth.


NEW QUESTION # 45
Which two protocols in the IPsec suite are most used for authentication and encryption? (Choose two.)

  • A. Security Association (SA)
  • B. Internet Key Exchange (IKE)
  • C. Secure Shell (SSH)
  • D. Encapsulating Security Payload (ESP)

Answer: B,D


NEW QUESTION # 46
Which two settings can you configure to speed up routing convergence in BGP? (Choose two.)

  • A. set-route-tag
  • B. link-down-failover
  • C. update-source
  • D. holdtime-timer

Answer: B,D


NEW QUESTION # 47
What are two common use cases for remote internet access (RIA)? (Choose two.)

  • A. Provide internet access through the hub
  • B. Provide thorough inspection on spokes
  • C. Centralize security inspection on the hub
  • D. Provide direct internet access on spokes

Answer: A,C


NEW QUESTION # 48
Refer to the exhibit.

FortiGate has multiple dial-up VPN interfaces incoming on port1 that match only FIRST_VPN.
Which two configuration changes must be made to both IPsec VPN interfaces to allow incoming connections to match all possible IPsec dial-up interfaces? (Choose two.)

  • A. Use different proposals are used between the interfaces.
  • B. Use unique Diffie Hellman groups on each VPN interface.
  • C. Configure the IKE mode to be aggressive mode.
  • D. Specify a unique peer ID for each dial-up VPN interface.

Answer: C,D


NEW QUESTION # 49
Refer to the exhibit.

The exhibit shows the SD-WAN rule status and configuration.
Based on the exhibit, which change in the measured latency will make T_MPLS_0 the new preferred member?

  • A. When T_INET_0_0 and T_MPLS_0 have the same latency.
  • B. When T_MPLS_0 has a latency of 100 ms.
  • C. When T_N1PLS_0 has a latency of 80 ms.
  • D. When T_INET_0_0 has a latency of 250 ms.

Answer: C


NEW QUESTION # 50
What are two reasons for using FortiManager to organize and manage the network for a group of FortiGate devices? (Choose two )

  • A. It simplifies the deployment and administration of SD-WAN on managed FortiGate devices.
  • B. It sends probe signals as health checks to the beacon servers on behalf of FortiGate.
  • C. It acts as a policy compliance entity to review all managed FortiGate devices.
  • D. It reduces WAN usage on FortiGate devices by acting as a local FortiGuard server.
  • E. It improves SD-WAN performance on the managed FortiGate devices.

Answer: A,D


NEW QUESTION # 51
......


Fortinet NSE7_SDW-7.0 exam is designed to test the knowledge and skills of IT professionals in the area of software-defined wide area networking (SD-WAN). NSE7_SDW-7.0 exam focuses on the Fortinet SD-WAN solution, version 7.0, and covers a wide range of topics related to SD-WAN, including deployment, management, troubleshooting, and security.

 

NSE7_SDW-7.0 Question Bank: Free PDF Download Recently Updated Questions: https://www.latestcram.com/NSE7_SDW-7.0-exam-cram-questions.html

NSE7_SDW-7.0 Brain Dump: A Study Guide with Tips & Tricks for passing Exam: https://drive.google.com/open?id=1Q6WLIlxxdDtTZ7epTtJLwsAMWyAkPtKa