New FCSS_NST_SE-7.6 Dumps For Preparing Fortinet Certified Solution Specialist Certified Fortinet Exam Well
Updated FCSS_NST_SE-7.6 Dumps Questions Are Available [2025] For Passing Fortinet Exam
NEW QUESTION # 19
Refer to the exhibit, which shows the output of get router info bgp summary.
Which two statements are true? (Choose two.)
- A. The local FortiGate has received 18 packets from a BGP neighbor.
- B. The local ForliGate has received one prefix from BGP neighbor 100.64.1.254.
- C. The local FortiGate is still calculating the prefixes received from BGP neighbor 100.64.2.264
- D. The TCP connection with BGP neighbor 100.64.2.254 was successful.
Answer: A,B
NEW QUESTION # 20
Refer to the exhibit.
Which three pieces of information does the diagnose sys top command provide? (Choose three.)
- A. The miglogd daemon would be on top of the list, if the administrator pressed m on the keyboard.
- B. The diagnose sys top command has been running for 18 minutes.
- C. If the neweli daemon continues to be in the R state, it will need to be manually restarted.
- D. The cmdbsvr process is occupying 2.4% of the total user memory space.
- E. The miglogd daemon is running on CPU core ID 0.
Answer: A,D,E
NEW QUESTION # 21
Refer to the exhibit, which shows the output of get router info ospf neighbor.
What can you conclude from the command output?
- A. The local FortiGate is not a DROther.
- B. The local FortiGate is the BDR.
- C. The network type connecting the local Fortigate and OSPF neighbor 0.0.0.10 is point-to-point.
- D. All neighbors are in area 0.0.0.0.
Answer: C
NEW QUESTION # 22
Exhibit.
Refer to the exhibit, which shows the output of a diagnose command.
What can you conclude about the debug output in this scenario?
- A. There is a natural correlation between the value in the FortiGuard-requests field and the value in the Weight field.
- B. Servers with a negative TZ value are less preferred for rating requests.
- C. FortiGate used 64.26.151.37 as the initial server to validate its contract.
- D. The first server provided to FortiGate when it performed a DNS query looking for a list of rating servers, was 121.111.236.179.
Answer: A
NEW QUESTION # 23
Refer to the exhibit.
Assuming a default configuration, which three statements are true? (Choose three.)
- A. User A: Pass. The default static route through wan1 passes the RPF check regardless of the source IP address.
- B. User C: Fail. There is no route to 10.0.4.63 using port1 in the touting table.
- C. Strict RPF is enabled by default.
- D. User B: Pass. FortiGate will use asymmetric routing using wan1 to reply to traffic for 95.56.234.24.
- E. User B: Fail. There is no route to 95.56.234.24 using wan2 in the routing table.
Answer: B,D,E
NEW QUESTION # 24
Refer to the exhibit, which shows a partial output of a real-time LDAP debug.
What two conclusions can you draw from the output? (Choose two.)
- A. FortiOS collects the user group information.
- B. FortiOS is performing the second step (Search Request) in the LDAP authentication process.
- C. The user was found in the LDAP tree, whose root is TAC.ottawa.fortinet.com.
- D. FortiOS performs a bind to the LDAP server using the user's credentials.
Answer: B,C
NEW QUESTION # 25
Exhibit.
Refer to the exhibit, which shows a partial output of diagnose hardware aysinfo memory.
Which two statements about the output are true? (Choose two.)
- A. The I/O cache, which has 641364 kB of memory allocated to it.
- B. There are 98908 kB o! memory that will never be used.
- C. The value indicated next to the inactive heading represents the currently unused cache page.
- D. The user space has 708880 kB of physical memory that is not used by the system.
Answer: B,C
NEW QUESTION # 26
Exhibit.
Refer to the exhibit, which shows a partial web fillet profile configuration.
Which action does FortiGate lake if a user attempts to access www. dropbox. com, which is categorized as File Sharing and Storage?
- A. FortiGate blocks the connection, based on the FortiGuard category based filter configuration.
- B. FortiGate exempts the connection, based on the Web Content Filter configuration.
- C. FortiGate blocks the connection as an invalid URL.
- D. FortiGate allows the connection, based on the URL Filter configuration.
Answer: A
NEW QUESTION # 27
During which phase of IKEv2 does the Diffie-Helman key exchange take place?
- A. IKE_Req_INIT
- B. Create_CHILD_SA
- C. IKE_SA_INIT
- D. IKE_Auth
Answer: C
NEW QUESTION # 28
Refer to the exhibit, which shows the partial output of FortiOS kernel slabs.
Which statement is true?
- A. The total slab size of the tcp_session slab is 7500 kB and is associated with the kernel.
- B. The total slab size of the ip_session slab is 3600 kB and is associated with the user space.
- C. The total slab size of the sctp_session slab is 0 kB and is associated with the user space.
- D. The total slab size of the ip6_session slab is 1300 kB and is associated with the kernel.
Answer: A
NEW QUESTION # 29
Exhibit.
Refer to the exhibit, which shows the output of a session. Which two statements are true? (Choose Iwo.)
- A. The session is being offloaded.
- B. The TCP session has been successfully established.
- C. The session was initiated from an authenticated user.
- D. The session is being inspected using flow inspection.
Answer: B,C
NEW QUESTION # 30
Refer to the exhibit, which shows a partial output from the get router info routing-table database command.
The administrator wants to configure a default static route for port3 and assign a distance of 50 and a priority of 0.
What will happen to the port1 and port2 default static routes after the port3 default static route is created?
- A. Neither of the routes shown in the output will be injected into the FIB.
- B. The port2 default static route will be injected into the forwarding information base (FIB).
- C. Both default static routes shown in the output will be injected into the FIB.
- D. The port1 default static route will be injected into the FIB.
Answer: B
NEW QUESTION # 31
Refer to the exhibit, which shows partial outputs from two routing debug commands.
Which change must an administrator make on FortiGate to route web traffic from internal users to the internet, using ECMP?
- A. Set preserve-session-route to enable.
- B. Set the priority of the static default route using port1 to 10.
- C. Set snat-route-change to enable.
- D. Set the priority of the static default route using port2 to 1.
Answer: B
NEW QUESTION # 32
Exhibit.
Refer to the exhibit, which shows a FortiGate configuration.
An administrator is troubleshooting a web filter issue on FortiGate. The administrator has configured a web filter profile and applied it to a policy; however the web filter is not inspecting any traffic that is passing through the policy.
What must the administrator do to fix the issue?
- A. Increase webfilter-timeout.
- B. Enable fortiguard-anycast.
- C. Change protocol to TCP.
- D. Disable webfilter-force-off.
Answer: D
NEW QUESTION # 33
Refer to the exhibit, which contains partial output from an IKE real-time debug.
The administrator does not have access to the remote gateway.
Based on the debug output, which configuration change the administrator make to the local gateway to resolve the phase 1 negotiation error?
- A. In the phase 1 proposal configuration, add AES128-SHA128 to the list of encryption algorithms.
- B. In the phase 1 proposal configuration, add AES256-SHA256 to the list of encryption algorithms.
- C. In the phase 1 proposal configuration, add AESCBC-SHA2 to the list of encryption algorithms.
- D. In the phase 1 network configuration, set the IKE version to 2.
Answer: B
NEW QUESTION # 34
Refer to the exhibit, which shows the output of the command get router info ospf neighbor.
To what extent does FortiGate operate when looking at its OSPF neighbors? (Choose two.)
- A. Neighbor 0.0.0.18 is the designated router (DR).
- B. The local FortiGate has at least one interface that participates in a point-to-point network.
- C. The local FortiGate has at least one interface that participates in a broadcast network.
- D. The local FortiGate is the DR.
Answer: B,C
Explanation:
The command on this slide shows a summary of the statuses of all the OSPF neighbors. For each neighbor, it displays the adjacency state and if it is a DR, a BDR, or neither (DROther) Pagina 362 Enterprise_Firewall_7.
2_Study. - Point-to-point networks contain only two peers, one at each end of a point-to-point link - Broadcast networks (multi-access) support more than two attached routers. They also support sending messages to multiple recipients (broadcasting). Pagina 365 Enterprise_Firewall_7.2_Study. In any multi-access network there is one DR and one BDR. Pagina 439 Network_Security_Support_Engineer_7.4_Study FULL/- This represents a point-to-point network
NEW QUESTION # 35
Refer to the exhibit, which shows a partial output of the fssod daemon real-time debug command.
What two conclusions can you draw Itom the output? (Choose two.)
- A. The workstation with IP 10.124.2.90 will be polled frequently using TCP port 445 to see if the user is still logged on.
- B. FSSO is using DC agent mode to detect logon events.
- C. The logon event can be seen on the collector agent installed on Windows.
- D. FSSO is using agentless polling mode to detect logon events.
Answer: A,D
NEW QUESTION # 36
Which two statements about conserve mode are true? (Choose two.)
- A. FortiGate enters conserve mode when the system memory reaches the configured extreme threshold.
- B. FortiGate exits conserve mode when the system memory goes below the configured green threshold.
- C. FortiGate starts dropping all new sessions when the system memory reaches the configured red threshold.
- D. FortiGate starts taking the configured action for new sessions requiring content inspection when the system memory reaches the configured red threshold.
Answer: B,D
NEW QUESTION # 37
......
Fortinet Exam 2025 FCSS_NST_SE-7.6 Dumps Updated Questions: https://www.latestcram.com/FCSS_NST_SE-7.6-exam-cram-questions.html
Free UPDATED Fortinet FCSS_NST_SE-7.6 Certification Exam Dumps is Online: https://drive.google.com/open?id=1jxQiOO9uFigh5Uu-Z0FtG6JocZ69sal4
