SPLK-1002 Study Guide Brilliant SPLK-1002 Exam Dumps PDF
View SPLK-1002 Exam Question Dumps With Latest Demo
The SPLK-1002 certification is a valuable credential that demonstrates a candidate's proficiency in using Splunk Core. It is recognized by employers and peers in the industry and can help IT professionals advance their careers. Splunk Core Certified Power User Exam certification also provides access to a community of Splunk certified professionals, which can be a valuable resource for networking and collaboration.
NEW QUESTION # 139
The gauge command:
- A. allows you to set colored ranges for a single-value visualization
- B. creates a radial gauge visualization
- C. creates a single-value visualization
Answer: A
NEW QUESTION # 140
Which of the following statements describes this search?
sourcetype=access_combined I transaction JSESSIONID | timechart avg (duration)
- A. This is a valid search and will display a stats table showing the maximum pause among transactions.
- B. No results will be returned because the transaction command must include the startswith and endswith options.
- C. No results will be returned because the transaction command must be the last command used in the search pipeline.
- D. This is a valid search and will display a timechart of the average duration, of each transaction event.
Answer: D
Explanation:
Explanation
This search uses the transaction command to group events that share a common value for JSESSIONID into transactions1. The transaction command assigns a duration field to each transaction, which is the difference between the latest and earliest timestamps of the events in the transaction1. The search then uses the timechart command to create a time-series chart of the average duration of each transaction1. Therefore, option A is correct because it describes the search accurately. Option B is incorrect because the search does not use the stats command or the pause field. Option C is incorrect because the transaction command does not require the startswith and endswith options, although they can be used to specify how to identify the beginning and end of a transaction1. Option D is incorrect because the transaction command does not have to be the last command in the search pipeline, although it is often used near the end of a search1.
NEW QUESTION # 141
Which of the following statements about tags is true? (select all that apply.)
- A. Tags categorize events based on a search.
- B. Tags are based on field/vale pairs.
- C. Tags are case-insensitive.
- D. Tags are designed to make data more understandable.
Answer: B,D
Explanation:
The following statements about tags are true: tags are based on field/value pairs and tags categorize events
based on a search. Tags are custom labels that can be applied to fields or field values to provide additional
context or meaning for your data. Tags can be used to filter or analyze your data based on common concepts or
themes. Tags can be created by using various methods, such as search commands, configuration files, user
interfaces, etc. Some of the characteristics of tags are:
Tags are based on field/value pairs: This means that tags are associated with a specific field name and a
specific field value. For example, you can create a tag called "alert" for the field name "status" and the
field value "critical". This means that only events that have status=critical will have the "alert" tag
applied to them.
Tags categorize events based on a search: This means that tags are defined by a search string that
matches the events that you want to tag. For example, you can create a tag called "web" for the search
string sourcetype=access_combined. This means that only events that match the search string
sourcetype=access_combined will have the "web" tag applied to them.
The following statements about tags are false: tags are case-insensitive and tags are designed to make data
more understandable. Tags are case-sensitive and tags are designed to make data more searchable. Tags are
case-sensitive: This means that tags must match the exact case of the field name and field value that they are
associated with. For example, if you create a tag called "alert" for the field name "status" and the field value
"critical", it will not apply to events that have status=CRITICAL or Status=critical. Tags are designed to make
data more searchable: This means that tags can help you find relevant events or patterns in your data by using
common concepts or themes. For example, if you create a tag called "web" for the search string
sourcetype=access_combined, you can use tag=web to find all events related to web activity.
NEW QUESTION # 142
Which of the following is one of the pre-configured data models included in the Splunk Common Information Model (CIM) add-on?
- A. Accounting
- B. Authorization
- C. Access
- D. Authentication
Answer: D
NEW QUESTION # 143
How can an existing accelerated data model be edited?
- A. An accelerated data model can be edited from the Pivot tool.
- B. An accelerated data model can be edited once its .tsidx file has expired.
- C. The data model must be de-accelerated before edits can be made to its structure.
- D. It cannot be edited. A new data model would need to be created.
Answer: C
Explanation:
An existing accelerated data model can be edited, but the data model must be de-accelerated before any structural edits can be made (Option C). This is because the acceleration process involves pre-computing and storing data, and changes to the data model's structure could invalidate or conflict with the pre-computed data. Once the data model is de-accelerated and edits are completed, it can be re-accelerated to optimize performance.
NEW QUESTION # 144
Selected fields are displayed ______each event in the search results.
- A. above
- B. below
- C. other fields
- D. interesting fields
Answer: B
Explanation:
Selected fields are fields that you choose to display in your search results by clicking on them in the Fields sidebar or by using the fields command2. Selected fields are displayed below each event in the search results, along with their values2. Therefore, option A is correct, while options B, C and D are incorrect because they are not places where selected fields are displayed.
NEW QUESTION # 145
There is NOT a SAVE AS option when editing a report.
- A. True
- B. False
Answer: A
NEW QUESTION # 146
A POST workflow action will pass which types of arguments to an external website?
- A. It can only send raw event data.
- B. Clear text only.
- C. Variables only.
- D. A mix of clear text strings and variables.
Answer: D
Explanation:
A POST workflow action in Splunk is designed to send data to an external web service by using HTTP POST requests. This type of workflow action can pass a combination of clear text strings and variables derived from the search results or event data. The clear text strings might include static text or predefined values, while the variables are dynamic elements that represent specific fields or values extracted from the Splunk events. This flexibility allows for constructing detailed and context-specific requests to external systems, enabling various integration and automation scenarios. The POST request can include both types of data, making it versatile for different use cases.
NEW QUESTION # 147
For choropleth maps,splunk ships with the following KMZ files (select all that apply)
- A. States of the United States
- B. Countries of the World
- C. Countries of the European Union
- D. States and provinces of the united states and Canada
Answer: A,B
Explanation:
Splunk ships with the following KMZ files for choropleth maps: States of the United States and Countries of the World. A KMZ file is a compressed file that contains a KML file and other resources. A KML file is an XML file that defines geographic features and their properties. A KMZ file can be used to create choropleth maps in Splunk by using the geom command. A choropleth map is a type of map that shows geographic regions with different colors based on some metric. Splunk ships with two KMZ files that define the geographic regions for choropleth maps:
* States of the United States: This KMZ file defines the 50 states of the United States and their boundaries. The name of this KMZ file is us_states.kmz and it is located in the
$SPLUNK_HOME/etc/apps/maps/appserver/static/geo directory.
* Countries of the World: This KMZ file defines the countries of the world and their boundaries. The name of this KMZ file is world_countries.kmz and it is located in the
$SPLUNK_HOME/etc/apps/maps/appserver/static/geo directory.
Splunk does not ship with KMZ files for States and provinces of the United States and Canada or Countries of the European Union. However, you can create your own KMZ files or download them from external sources and use them in Splunk.
NEW QUESTION # 148
Which of the following searches would create a graph similar to the one below?
- A. index_internal seourcetype=Savesplunker | fields sourcetype, status | transaction status maxspan-id | start count states
- B. index_internal seourcetype=Savesplunker | fields sourcetype, status | transaction status maxspan-id | chart count states by -time
- C. None of these searches would generate a similart graph.
- D. index_internal seourcetype=Savesplunker | fields sourcetype, status | transaction status maxspan-id | timechart count by status
Answer: D
Explanation:
The following search would create a graph similar to the one below:
index_internal sourcetype=Savesplunker | fields sourcetype, status | transaction status maxspan=1d | timechart count by status The search does the following:
It uses index_internal to specify the internal index that contains Splunk logs and metrics.
It uses sourcetype=Savesplunker to filter events by the sourcetype that indicates the Splunk Enterprise Security app.
It uses fields sourcetype, status to keep only the sourcetype and status fields in the events.
It uses transaction status maxspan=1d to group events into transactions based on the status field with a maximum time span of one day between the first and last events in a transaction.
It uses timechart count by status to create a time-based chart that shows the count of transactions for each status value over time.
The graph shows the following:
It is a line graph with two lines, one yellow and one blue.
The x-axis is labeled with dates from Wed, Apr 4, 2018 to Tue, Apr 10, 2018.
The y-axis is labeled with numbers from 0 to 15.
The yellow line represents "shipped" and the blue line represents "success".
The yellow line has a steady increase from 0 to 15, while the blue line has a sharp increase from 0 to 5, then a decrease to 0, and then a sharp increase to 10.
The graph is titled "Type".
Therefore, option C is the correct answer.
NEW QUESTION # 149
Which of the following statements is true, especially in large environments?
- A. Use the transaction command when you want to see the results of a calculation.
- B. Use the scats command when you next to group events by two or more fields.
- C. The stats command is faster and more efficient than the transaction command
- D. The transaction command is faster and more efficient than the stats command.
Answer: C
NEW QUESTION # 150
Which of the following statements about event types is true? (select all that apply)
- A. Event types categorize events based on a search.
- B. Event types can be a useful method for capturing and sharing knowledge.
- C. Event types can be tagged.
- D. Event types must include a time range,
Answer: A,B,C
Explanation:
Reference:https://www.edureka.co/blog/splunk-events-event-types-and-tags/
As mentioned before, an event type is a way to categorize events based on a search string that matches the
events2. Event types can be tagged, which means that you can apply descriptive labels to event types and use
them in your searches2. Therefore, option A is correct. Event types categorize events based on a search string,
which means that you can define an event type by specifying a search string that matches the events you want
to include in the event type2. Therefore, option C is correct. Event types can be a useful method for capturing
and sharing knowledge, which means that you can use event types to organize your data into meaningful
categories and share them with other users in your organization2. Therefore, option D is correct. Event types
do not have to include a time range, which means that you can create an event type without specifying a time
range for the events2. Therefore, option B is incorrect.
NEW QUESTION # 151
Which of the following searches would return a report of sales by product-name?
- A. timechart list(sales), values(product_name)
- B. stats sum(price) as sales over product_name
- C. chart sales by product_name
- D. chart sum(price) as sales by product_name
Answer: B
Explanation:
Reference:
http://hilllaneconsulting.co.uk/blog/?p=640
NEW QUESTION # 152
Which of the following searches will return events contains a tag name Privileged?
- A. Tag= Priv
- B. Tag= Priv*
- C. Tag= Privileged
- D. Tag= Pri*
Answer: D
Explanation:
Reference:https://docs.splunk.com/Documentation/PCI/4.1.0/Install/PrivilegedUserActivity
A tag is a descriptive label that you can apply to one or more fields or field values in your events1. You can
use tags to simplify your searches by replacing long or complex field names or values with short and simple
tags1. To search for events that contain a tag name, you can use the tag keyword followed by an equal sign
and the tag name1. You can also use wildcards (*) to match partial tag names1. Therefore, option B is correct
because it will return events that contain a tag name that starts with Pri. Options A and D are incorrect because
they will only return events that contain an exact tag name match. Option C is incorrect because it will return
events that contain a tag name that starts with Priv, not Privileged.
NEW QUESTION # 153
What do events in a transaction have In common?
- A. All events in a transaction must have the exact same set of fields.
- B. All events in a transaction must have the same sourcetype.
- C. All events in a transaction must be related by one or more fields.
- D. All events In a transaction must have the same timestamp.
Answer: C
Explanation:
Reference:https://docs.splunk.com/Documentation/Splunk/8.0.3/Knowledge/Abouttransactions
A transaction is a group of events that share some common characteristics, such as fields, time, or both. A
transaction can be created by using the transaction command or by defining an event type
withtransactiontype=true in props.conf. Events in a transaction have one or more fields in common that relate
them to each other. For example, you can create a transaction based on JSESSIONID, which is a unique
identifier for each user session in web logs. Events in a transaction do not have to have the same timestamp,
sourcetype, or exact same set of fields. They only have to share one or more fields that define the transaction.
NEW QUESTION # 154
When you mouse over and click to add a search term this (thesE. Boolean operator(s) is(arE. not implied. (Select all that apply).
- A. ( )
- B. OR
- C. AND
- D. NOT
Answer: A,B,D
Explanation:
When you mouse over and click to add a search term from the Fields sidebar or from an event in your search results, Splunk automatically adds the term to your search string with an implied AND operator2. However, this does not apply to some Boolean operators such as OR, NOT and parentheses (). These operators are not implied when you add a search term and you have to type them manually if you want to use them in your search string2. Therefore, options A, B and D are correct, while option C is incorrect because AND is implied when you add a search term.
NEW QUESTION # 155
Which syntax will find events where the values for the 1 field match the values for the Renewal-MonthYear field?
- A. | where 10yearAnnerversary=Renewal-MonthYear
- B. | where '10yearAnnerversary'='Renewal-MonthYear'
- C. | where 10yearAnnerversary='Renewal-MonthYear'
- D. | where '10yearAnnerversary=Renewal-MonthYear
Answer: A
Explanation:
The correct answer is A. | where 10yearAnnerversary=Renewal-MonthYear.
The where command is used to filter the search results based on an expression that evaluates to true or false.
The where command can compare two fields, two values, or a field and a value. The where command can also use functions, operators, and wildcards to create complex expressions1.
The syntax for the where command is:
| where <expression>
The expression can be a comparison, a calculation, a logical operation, or a combination of these. The expression must evaluate to true or false for each event.
To compare two fields with the where command, you need to use the field names without any quotation marks. For example, if you want to find events where the values for the 10yearAnnerversary field match the values for the Renewal-MonthYear field, you can use the following syntax:
| where 10yearAnnerversary=Renewal-MonthYear
This will return only the events where the two fields have the same value.
The other options are not correct because they use quotation marks around the field names, which will cause the where command to interpret them as string values instead of field names. For example, if you use:
| where '10yearAnnerversary'='Renewal-MonthYear'
This will return no events because there are no events where the string value '10yearAnnerversary' is equal to the string value 'Renewal-MonthYear'.
References:
* where command usage
NEW QUESTION # 156
......
The SPLK-1002 exam consists of 65 multiple-choice questions that must be completed within 90 minutes. SPLK-1002 exam covers a range of topics, including using Splunk to search and navigate data, creating and managing alerts, and working with macros and workflow actions. Candidates will also be tested on their ability to use Splunk's advanced features, such as data models, pivot, and transaction commands.
Free SPLK-1002 Test Questions Real Practice Test Questions: https://www.latestcram.com/SPLK-1002-exam-cram-questions.html
SPLK-1002 Dumps Updated Oct 15, 2024 WIith 286 Questions: https://drive.google.com/open?id=1uND-yUitkWvhAlgSfsLIgWequrDgWQ8B
