[Sep 04, 2021] DES-1423 Ultimate Study Guide - LatestCram [Q30-Q54]

Share

[Sep 04, 2021] DES-1423 Ultimate Study Guide -  LatestCram

Ultimate Guide to Prepare DES-1423 Certification Exam for DCS-IE in 2021

NEW QUESTION 30
An Isilon administrator has four H600 nodes and eight A2000 nodes in the cluster. The file pool policy is configured to have all new data written to the H600 nodes. After a few weeks, the administrator has some concerns about the available capacity on the H600 nodes.
Which feature should be configured to accept writes, even after the H600 nodes become full?

  • A. GNA
  • B. SmartPools
  • C. Virtual Hot Spare
  • D. Spillover

Answer: D

 

NEW QUESTION 31
A Job Engine is running in low space mode and no jobs are in the running state. What is the OneFS8.2 behavior if the AutoBalance job is initiated?

  • A. Job is not started.
  • B. Job is put into the queue.
  • C. Job is failed.
  • D. Job is started.

Answer: D

Explanation:
References:
494 / 495 Autobalance is a space saving job
Isilon Administration and Management participant guide

 

NEW QUESTION 32
Which HTTPS port number should be used to connect to any node in an Isilon cluster?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: D

Explanation:
Explanation/Reference: https://www.dellemc.com/en-us/collaterals/unauth/technical-guides-support-information/2019/09/ docu95378.pdf

 

NEW QUESTION 33
Which OneFS 8.0 feature can be added to an NFSv4 export to assist with seamless failover in the event of a disconnect?

  • A. Stateless connection
  • B. Transparent failover
  • C. Stateful connection
  • D. Continuous availability

Answer: C

Explanation:
Explanation/Reference: https://www.dellemc.com/resources/en-us/asset/white-papers/products/storage/ h17240_wp_isilon_onefs_nfs_design_considerations_bp.pdf (7)

 

NEW QUESTION 34
What impact can obsolete drive firmware have on an Isilon cluster?

  • A. Affects cluster performance or hardware reliability.
  • B. Affects redundancy settings and FEC coding.
  • C. Increases runtime and cluster performance.
  • D. Reduces administrative overhead and increases performance.

Answer: A

 

NEW QUESTION 35
Which OneFS 8.0 feature can be added to an NFSv4 export to assist with seamless failover in the event of a disconnect?

  • A. Continuous availability
  • B. Stateless connection
  • C. Stateful connection
  • D. Transparent failover

Answer: A

Explanation:
References:
257
Isilon Administration and Management participant guide

 

NEW QUESTION 36
Which command provides cluster statistics including protocol, disk input, and disk output?

  • A. isi statistics protocol
  • B. isi statistics system
  • C. isi statistics client
  • D. isi statistics drive

Answer: B

Explanation:
Explanation/Reference: https://www.dell.com/community/Isilon/isi-statistics-command-document/td-p/7101434

 

NEW QUESTION 37
An Isilon administrator wants to minimize the use of root/admin access to their cluster. In additional, the administrator wants to create specific administrative accounts for specific cluster management activities in different access zones. An administrator of one zone should be able to view or configure objects in a different zone.
Which action will address the administrator's requirements?

  • A. Create ZRBAC role for the administrator on all access zone.
  • B. Create an unique role in the System zone for each administrator.
  • C. Create a separate management subnet for each administrator.
  • D. Create ZRBAC role for each zone administrator.

Answer: D

Explanation:
Explanation/Reference: https://www.dellemc.com/en-us/collaterals/unauth/technical-guides-support-information/2019/09/ docu95372.pdf (113)

 

NEW QUESTION 38
An Isilon administrator wants to create a new SMB share to an existing directory structure. The directory contains migrated production data and has an active NFS export. What will happen if the administrator selects the "Apply Windows default ACLs" option during creation?

  • A. Windows default ACLs are merged with the existing mode bit rights.
  • B. Creation of the SMB share fails due to the existing mode bit rights.
  • C. Existing mode bit rights are overwritten by the Windows default ACLs.
  • D. Windows default ACLs are overwritten by the existing mode bit rights.

Answer: C

Explanation:
246
Isilon Administration and Management participant guide

 

NEW QUESTION 39
A company's Isilon cluster has reached the capacity limit. The cluster consists of eight H500 nodes in a single node pool. Which action can be taken to resolve the capacity issue while new nodes are being delivered?

  • A. Release VHS drives
  • B. Enable Spillover
  • C. Enable GNA
  • D. Activate SmartPools

Answer: D

 

NEW QUESTION 40
Which deduplication phase is excluded from the Dry Run process?

  • A. Sampling
  • B. Sharing
  • C. Index Updating
  • D. Commonality Detection

Answer: B

Explanation:
473
Isilon Administration and Management participant guide

 

NEW QUESTION 41
You are configuring the network on a Isilon source cluster. The administrator wants to dedicate a new subnet for replication. Which consideration must be addressed for SyncIQ to work properly?

  • A. SyncIQ must run on a dynamic IP pool
  • B. 10GbE ports must be used for replication
  • C. SyncIQ must run on a static IP pool.
  • D. SnapshotIQ must be licensed first.

Answer: B

 

NEW QUESTION 42
What is the recommended number of delegations for a SmartConnect zone name for each SmarConnect zone alias on a cluster?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: B

Explanation:
135
Isilon Administration and Management participant guide

 

NEW QUESTION 43
A company wants to re-use HD400 nodes into a new cluster with OneFS 8.2.0. What is the minimum number of HD400 nodes required?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: B

Explanation:
Explanation/Reference: https://www.commoncriteriaportal.org/files/epfiles/383-7-148%20ST%20v1.0.pdf (9)

 

NEW QUESTION 44
An Isilon administrator has four H600 nodes and eight A2000 nodes in the cluster. The file pool policy is configured to have all new data written to the H600 nodes. After a few weeks, the administrator has some concerns about the available capacity on the H600 nodes.
Which feature should be configured to accept writes, even after the H600 nodes become full?

  • A. GNA
  • B. SmartPools
  • C. Virtual Hot Spare
  • D. Spillover

Answer: D

Explanation:
Explanation/Reference: https://groups.google.com/forum/#!topic/isilon-user-group/CpalY7Jy6Xs

 

NEW QUESTION 45
Which deduplication phase is excluded from the Dry Run process?

  • A. Sampling
  • B. Sharing
  • C. Index Updating
  • D. Commonality Detection

Answer: C

 

NEW QUESTION 46
You have been tasked with designing SyncIQ policies for a systems administrator that requires failover and failback testing. What information should be provided to the administrator?

  • A. SyncIQ supports failback replication policies that specify directory includes or excludes.
  • B. Failback replication policies that specify includes or excludes cannot use historical snapshots.
  • C. Failback replication policies that specify includes or excludes are not supported with SyncIQ.
  • D. Failback replication policies that specify includes or excludes cannot use data encryption.

Answer: C

Explanation:
Explanation/Reference: https://mydocuments.emc.com/pub/en-us/isilon/onefs/7.2.1/ifs-pub-administration-guide-cli/15-ifs- br-data-replication-with-synciq.htm

 

NEW QUESTION 47
A user has recently left the company. After two weeks, the Isilon administrator receive a request to provide some files from the user's directory called \ifs\user\John_Doe\development. The administrator then discovers that the required files have been deleted, but a snapshot of the directory is available.
After restoring the files from the snapshot, which additional step is necessary to access the files?

  • A. Permissions of the restored files need to be changed.
  • B. Restored files need to be copied from the .restore directory to the user directory.
  • C. Restored files need to be copied from the .snapshot directory to the .restore directory.
  • D. Permissions of the user directory need to be changed.

Answer: A

Explanation:
Explanation/Reference: https://community.emc.com/community/products/isilon/blog/2016/04/25/restoring-from-snapshots

 

NEW QUESTION 48
How many Active Directory provider instances can be configured per access zone?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: B

Explanation:
Explanation/Reference: http://doc.isilon.com/onefs/zzz_archive/cloudpools_staging/ifs_c_active_directory.html

 

NEW QUESTION 49
When using NIC aggregation, which configuration is supported in an Isilon Gen 5 environment?

  • A. 10gige-1 port of node 1 and 10gige-1 of node 2 aggregated together
  • B. ext-1 and ext-2 of node 1 aggregated together
  • C. ext-1 and 10gige-1 of node 1 aggregated together
  • D. ext-1 port of node 1 and ext-1 port of node 2 aggregated together

Answer: D

 

NEW QUESTION 50
What defines FEC link aggregation mode?

  • A. Balances outbound traffic across all active ports in the aggregated link.
  • B. Balances outgoing traffic based on hashed protocol header information that includes source and destination addresses.
  • C. Balances outgoing traffic based on hashed protocol header information that includes source and destination addresses, and VLAN tag.
  • D. Switches to the next interface when the primary interface becomes unavailable.

Answer: C

 

NEW QUESTION 51
You are configuring the network on a Isilon source cluster. The administrator wants to dedicate a new subnet for replication. Which consideration must be addressed for SyncIQ to work properly?

  • A. 10GbE ports must be used for replication
  • B. SyncIQ must run on a static IP pool.
  • C. SyncIQ must run on a dynamic IP pool
  • D. SnapshotIQ must be licensed first.

Answer: B

Explanation:
Isilon Administration and Management participant guide

 

NEW QUESTION 52
An Isilon administrator wants to enable quota notifications for their LDAP users. However, the users' email IDs are not updated in the LDAP environment. What additional configuration needs to be performed?

  • A. Configure the local provider
  • B. Manage local users and groups
  • C. Configure a mapping rule
  • D. Configured the file provider

Answer: C

 

NEW QUESTION 53
On which node does the SSIP initially reside?

  • A. Lowest logical node number
  • B. Lowest node ID
  • C. Highest node ID
  • D. Highest logical node number

Answer: A

 

NEW QUESTION 54
......

DCS-IE Fundamentals-DES-1423 Exam-Practice-Dumps: https://www.latestcram.com/DES-1423-exam-cram-questions.html