Nov-2022 NS0-162 Study Material, Preparation Guide and PDF Download
Free NS0-162 Certification Sample Questions with Online Practice Test
Network Appliance NS0-162 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION 41
After creating an SVM In an ONTAP cluster, you are asked to delegate administration of the newly created SVM to an SVM administrator. In this scenario, which two tasks must you complete? (Choose two.)
- A. Configure role-based access control (RBAC) for the vsadmin user account.
- B. Create a LIF for SVM management.
- C. Create the vsadmin user account in the new SVM.
- D. Set a password for the vsadmin user account.
Answer: B,D
NEW QUESTION 42
What are three supported fabric-attached Metro Cluster solutions? (Choose three.)
- A. an eight-node solution
- B. a four-node solution
- C. a two-node solution
- D. a two-node bridge-attached solution
- E. a two-node direct-attached solution
Answer: A,B,C
NEW QUESTION 43
What is the default RAID policy for aggregates created with 10 TB disk drives?
- A. RAID-DP
- B. RAIDO
- C. RAID4
- D. RAID-TEC
Answer: D
NEW QUESTION 44
Exhibit.
You have a 2-node NetApp FAS2750 ONTAP cluster. You create a new 20-GB LUN In a new 100-GB volume and write 10 GB of data to the LUN. No storage efficiencies are enabled for the volume or aggregate.
Referring to the exhibit, which two statements are true? (Choose two.)
- A. ONTAP reports the volume as 10% full.
- B. ONTAP reports the volume as 20% full.
- C. ONTAP reports that the volume Is using 10 GB of Its containing aggregate.
- D. ONTAP reports that the volume Is using 100 GB of its containing aggregate.
Answer: B,D
NEW QUESTION 45
You are the administrator of your company's ONTAP 9.7 storage systems. You are asked to configure your ONTAP system so that the backup department can perform NDMP backups of your SVM data.
Which two steps must be completed to accomplish this task? (Choose two.)
- A. Install the NDMP license on all nodes in your cluster.
- B. Create a cluster peer between the source SVM and the NDMP destination.
- C. Enable the NDMP service on your SVM.
- D. Allow the NDMP protocol on your SVM.
Answer: C,D
NEW QUESTION 46
Your company requires WORM archiving of data on their ONTAP cluster. The data must not be able to be deleted even by an administrator. Which ONTAP feature fulfills this requirement?
- A. SnapLock Enterprise
- B. SnapMlrror software
- C. SnapLock Compliance
- D. SnapVault software
Answer: D
NEW QUESTION 47
You have an ESXI cluster with VMware VMFS LUNs on an AFF A400 system. After troubleshooting performance Issues, you determine that timeout best practices are not set on the hosts.
In this scenario, which NetApp tool would apply the best practice settings?
- A. Virtual Storage Console (VSC)
- B. SAN Host Utilities
- C. SnapCenter Plug-in for VMware vSphere
- D. SnapManager
Answer: B
NEW QUESTION 48
Exhibit
You have Installed a new ONTAP 9.8 cluster and want to move the e0e and e0c ports into a new broadcast domain. Referring to the exhibit, which action satisfies this requirement?
- A. Use the irrDadcast-domain create command
- B. Use the broadcast-domain split command.
- C. Use the broadcast-domain= merge command.
- D. Use ONTAP System Manager to create a new broadcast domain.
Answer: B
NEW QUESTION 49
After deploying an ONTAP 9.8 cluster, you want to disable the unused Ethernet ports. In this scenario, which two methods would accomplish this task? (Choose two.)
- A. Use ONTAP System Manager.
- B. Use Active IQ Config Advisor.
- C. Use the command line interface.
- D. Use Active IQ Unified Manager.
Answer: A,C
NEW QUESTION 50
What are three firewall policies? (Choose three.)
- A. data
- B. cluster
- C. mgmt
- D. node
- E. intercluster
Answer: A,C,E
NEW QUESTION 51
Which command parameter will result in a thin-provisioned LUN?
- A. -space-gurantee none
- B. -space-reservation disabled
- C. -space-allocation enabled
- D. -space-guarantee volume
Answer: A
NEW QUESTION 52
All SMB users are reporting that their network share performance Is slow on a new NetApp FAS500f HA pair. You determine that the users have converged network adapters (CNAs) with flow control enabled and no option to disable.
In this scenario, which two flow control settings are recommended on the NetApp ONTAP physical ports? (Choose two.)
- A. Disable flow control end-to-end on cluster network ports.
- B. Disable flow control end-to-end on data network ports.
- C. Enable flow control end-to-end on data network ports.
- D. Enable flow control end-to-end on cluster network ports.
Answer: A,B
NEW QUESTION 53
Exhibit.
You are caching on-premises ONTAP volumes into the cloud with Cloud Volumes ONTAP as shown in the exhibit. In this scenario, which two protocols are supported? (Choose two.)
- A. NFS
- B. ISCSI
- C. SMB
- D. NVMe
Answer: A,B
NEW QUESTION 54
Which two types of capacity tiers are supported with FabricPool aggregates In ONTAP 9.8? (Choose two.)
- A. S3 Object Store
- B. SWIFT Object Store
- C. NFS Export
- D. StorageGRID Object Storage
Answer: A,D
NEW QUESTION 55
Exhibit.
After an ONTAP upgrade, you notice that several cluster LIFs are not on their home ports as shown in the exhibit.
Which LIF option would change this outcome?
- A. the failover-policy option
- B. the data-protocol option
- C. the auto-revert option
- D. the subnet-name option
Answer: C
Explanation:
https://docs.netapp.com/us-en/ontap/networking/revert_a_lif_to_its_home_port.html
NEW QUESTION 56
You attempt to create an SVM for CIFS access only.
In this scenario, which three actions must be performed to Join the existing Active Directory? (Choose three.)
- A. Create export policies.
- B. Create a cluster LIF.
- C. Create NTP entries.
- D. Create DNS entries.
- E. Create a data LIF.
Answer: C,D,E
Explanation:
Before creating an SMB server in an Active Domain controller, you must ensure that the cluster time and the time on the domain controllers of the domain to which the SMB server will belong matches to within five minutes. https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.pow-cifs-cg%2FGUID-5AE3CADE-5EF1-403B-A664-2DEA9F13B0C8.html
NEW QUESTION 57
Click the Exhibit button.
You are configuring your tape backup software to authenticate to your single-node cluster by using NDMP.
Referring to the exhibit, which LIF do you use to connect?
- A. data_lif1
- B. cluster1-01_mgmt1
- C. cluster1-01_icl
- D. cluster_mgmt
Answer: C
NEW QUESTION 58
You want to scale out storage performance for read-Intensive data across multiple locations. In this scenario, which NetApp feature accomplishes this task?
- A. FlexClone
- B. FlexCache
- C. FlexVol
- D. Flash Pool
Answer: A
NEW QUESTION 59
You want to monitor system performance in real time.
In this scenario, which two tools would you use to accomplish this task? (Choose two.)
- A. Active IQ Digital Advisor
- B. ONTAP CLI
- C. ONTAP System Manager
- D. Active IQ Unified Manager
Answer: B,C
NEW QUESTION 60
Exhibit.
You recently added a new ESXi host to your VMware vSphere cluster. However, you cannot mount any of the existing NFS datastores to the host. Referring to the exhibit, which action solves the problem?
- A. Enable Kerberos in the export policy.
- B. Add NFSv4 to the access protocols.
- C. Add SMB/CIFS to the access protocols.
- D. Add HOST 3's IP address to the NFS export policy.
Answer: A
NEW QUESTION 61
Click the Exhibit button.
You are the administrator of your company's ONTAP 9.7 storage system. You try to connect your vSphere hosts to a newly created NFS datastore and receive the error message shown in the exhibit.
What must you do to solve this problem?
- A. Add the vSphere host's IP addresses to an export policy rule.
- B. Change the volume security style to UNIX.
- C. Activate all NFS protocol versions in your SVM.
- D. Set the MTU size for the data LIF to 9000.
Answer: B
NEW QUESTION 62
Exhibit.
A Linux host with the 10.0.1.24 IP address is unable to mount the VOL_A volume using NFSv3.
Referring to the exhibit, what is the problem?
- A. The host IP address does not match the export policy rule.
- B. The volume is in read-only.
- C. The volume is not mounted In the namespace.
- D. The logical Interface does not allow the NFSv3 protocol.
Answer: A
NEW QUESTION 63
......
NetApp NS0-162 Exam Certification Details:
| Exam Name | Data Administrator ONTAP |
| Duration | 90 minutes |
| Exam Registration | PEARSON VUE |
| Recommended Training | ONTAP Cluster Fundamentals (WBT) ONTAP Cluster Administration (ILT) ONTAP Data Protection Fundamentals (WBT) |
| Exam Price | $150 USD |
NS0-162 Certification Study Guide Pass NS0-162 Fast: https://www.latestcram.com/NS0-162-exam-cram-questions.html
NS0-162 Dumps PDF 2022 Program Your Preparation EXAM SUCCESS: https://drive.google.com/open?id=1HuMb53_uBlU4xITjYQ4DEbGYKayJauGN
