[Nov 13, 2021] JN0-1362 Test Engine files, JN0-1362 Dumps PDF [Q72-Q93]

Share

[Nov 13, 2021] JN0-1362 Test Engine files, JN0-1362 Dumps PDF 

Latest Juniper JN0-1362 PDF and Dumps (2021) Free Exam Questions Answers

NEW QUESTION 72
Your company is designing a new data center in a remote location that must be connected to your local data center. You have a service provider connection between the CE devices at each site. You want to implement EVPN with VXLAN services between sites, but the service provider does not offer EVPN services.
Which two statements are true in this scenario? (Choose two )

  • A. The service provider must provide an MPLS-based VPN connection between sites
  • B. You can still implement EVPN service across the service provider as long as there is IP reachability between the sites.
  • C. The customer's edge devices within your data center can act as VXLAN Layer 2 gateways
  • D. The provider's edge devices must map your VXLAN VNIs to MPLS LSPs within the provider network at each site

Answer: B,C

 

NEW QUESTION 73
Exhibit.

Referring to the exhibit which statement is true about the connectivity between service provider A and B regarding the customer's network information?

  • A. The service providers must set up MP-BGP between each other to support this inter-network routing.
  • B. The customer is acting as a colocation (meet-me) for an inter-network routing scenario shown in the exhibit.
  • C. The service providers may not be aware that they are providing inter-network routing for the customer.
  • D. The service providers must set up MPLS label exchange between each other for this scenario to work.

Answer: A

 

NEW QUESTION 74
A customer wants to use the Internet to connect to a large number of remote sites. They want a solution that is easy to use and one that provides secure connectivity.
Which technology will meet these requirements?

  • A. Auto Discovery VPN (ADVPN)
  • B. generic routing encapsulation (GRE)
  • C. Link Layer Discovery Protocol (LLDP)
  • D. equal-cost multipath (ECMP)

Answer: B

 

NEW QUESTION 75
Which two statements about a customer's WAN connectivity are correct? (Choose two)

  • A. SD-WAN dynamically manages customer traffic across multiple WAN connections.
  • B. SD-WAN requires an IPsec tunnel to connect customer sites across the Internet.
  • C. Layer 3 managed services automatically include Layer 2 provisioning to support the customer's needs.
  • D. Layer 2 managed services connects the customer's sites and the customer provides their own routing capability.

Answer: A,D

 

NEW QUESTION 76
You are designing an EVPN data center solution with VXLAN.
Which two statements are true in this scenario? (Choose two)

  • A. The original MAC address is replaced by a VXLAN VNI.
  • B. The original MAC address is encapsulated within the VXLAN frame.
  • C. The original MAC address is advertised to remote PEs.
  • D. The original MAC address is prepended to a VXLAN VNI.

Answer: B,C

 

NEW QUESTION 77
You must build a portable and customizable template to secure the What are two components of this template? (Choose two )

  • A. firewall filter
  • B. generic policers
  • C. routing policy
  • D. stateful firewall policy

Answer: A,C

 

NEW QUESTION 78
You have a customer that operates multiple branch offices and they want a low cost access solution.
The WAN must be secure What would satisfy their requirement?

  • A. an encrypted MPLS service
  • B. an IPsec VPN using broadband connections
  • C. a private WAN
  • D. a managed MPLS service

Answer: B

 

NEW QUESTION 79
Your backbone network has a single dark fiber between two backbone sites within the same metro area. Currency this link is being used as a point-to-point 100ObE link between the routers using gray optics. The link has been experiencing high utilization and you are asked to propose network design changes to increase capacity across this network segment.
Which statement is true in this scenario?

  • A. Enabling MPLS will increase capacity due to statistical multiplexing.
  • B. New optical interfaces will need to be added to the routers.
  • C. Gray optics can be used to increase capacity by enabling additional wavelengths.
  • D. Interfaces need to be reconfigured for 200GbE.

Answer: B

 

NEW QUESTION 80
You are deploying new WAN services between two routers and you are required to encrypt all traffic at Layer 2 Which solution would satisfy this requirement?

  • A. 802.1X
  • B. RADIUS
  • C. MACsec
  • D. IPsec

Answer: A

 

NEW QUESTION 81
Your customer requires redundant routers and wants to use VRRP for the default gateway at their Internet edge.
Which two statements are correct in this scenario? (Choose two )

  • A. The VRRP master and backup send advertisements to each other at regular intervals.
  • B. VRRP dynamically elects master and backup routers
  • C. VRRP for IPv6 provides a much faster switchover to an alternate default router than IPv6 neighbor discovery procedures
  • D. VRRP will only support two routers

Answer: A,B

 

NEW QUESTION 82
According to Juniper Networks, which two statements describe OoB network design best practices? (Choose two.)

  • A. Ensure that all users are authenticated using individual accounts and credentials.
  • B. Ensure that the management network is accessible through the production network.
  • C. Ensure that the management network uses a unique IP network.
  • D. Ensure that only console ports are used to manage devices.

Answer: C,D

 

NEW QUESTION 83
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?

  • A. Prepend your AS number multiple times on the prefix advertised to SP-B.
  • B. Advertise the prefix to SP-B with a higher local preference.
  • C. Prepend your AS number multiple times on the prefix advertised to SPA.
  • D. Advertise the prefix to SP-A with a higher local preference.

Answer: A

 

NEW QUESTION 84
Your WAN links are on a VPLS service from a single service provider. You must verify device configuration power and status in the event of a service outage.
Which two actions provide out-of-band management to your edge routers? (Choose two)

  • A. Connect each Ethernet management interface to a dedicated switch with traffic routed on its own subnet on the VPLS service
  • B. Connect each serial management port to a console server with a cellular Internet connection
  • C. Connect each Ethernet management interface to a dedicated switch with its own WAN connection.
  • D. Place management traffic on a separate VLAN on the VPLS service

Answer: B,C

Explanation:
https://www.wti.com/t-remote-console-and-power-management-for-juniper-switches-and-routers.aspx

 

NEW QUESTION 85
Exhibit.

You are asked to ensure that most traffic that traverses your network is load balanced over all of the equal cost links between the routers in your network. However, you must also ensure that traffic from ISP A that is destined for ISP D must traverse the R1-R2-R3-R4-R5 path.
Referring to the exhibit how would you accomplish this task?

  • A. Adjust the BGFs LOCAL PREF attribute to ensure that the raw IP packets follow the required path.
  • B. Force the ISP A to ISP D traffic over RSVP-signaled LSPs.
  • C. Force the ISP A to ISP D traffic over LDP-signaled LSPs.
  • D. Adjust the OSPF metrics of each link so that the raw IP packets follow the required path.

Answer: B

 

NEW QUESTION 86
You are designing several MPLS virtual routing and forwarding (VRF) instances on all provider edge (PE) routers. Routes within each VRF should be exchanged between all PE routers provisioned for that VRF.
For each VRF routing instance which two attributes must match on all related PE routers? (Choose two )

  • A. router ID
  • B. VRF target
  • C. instance type
  • D. interfaces

Answer: B,C

 

NEW QUESTION 87
You are creating a WAN solution design for an enterprise customer. The customer will be connecting three sites in different locations. The customer wants all of the sites to be part of the same Layer 2 network.
In this scenario, what are two valid connection methods you would provide in your design? (Choose two.)

  • A. NG-MVPN
  • B. IPsecVPN
  • C. leased line
  • D. EVPN

Answer: B,D

 

NEW QUESTION 88
You 2 VPN services to interconnect three of their sites.

  • A. It maintains all MPLS LSPs between the sites.
  • B. It selects the appropriate circuit on which to traverse the Layer 2 VPN.
  • C. It maintains all customer Layer 3 routing information.
  • D. It maintains an MP-BGP session to all other sites to exchange route information for the Layer 2 VPN.
  • E. In this scenario, what are two functions of the CE device? (Choose two.)

Answer: A,C

 

NEW QUESTION 89
Exhibit.

You are asked to design a solution that will provision a circuit from the corporate headquarters to a remote branch. The circuit must be secure, and must support IGP adjacencies. IPsec has been chosen to secure traffic across the WAN connection.
Referring to the exhibit which statement describes another requirement for this circuit to function correctly?

  • A. You must use a service provider Layer 3 VPN to establish routing protocols across the circuit
  • B. You must implement GRE over IPsec to establish routing protocols across the circuit.
  • C. You must use a service provider Layer 2 VPN to establish routing protocols across the circuit.
  • D. You must increase the MTU of the IPsec tunnel to more than 1500 bytes to allow routing updates across the circuit.

Answer: B

 

NEW QUESTION 90
You are designing a solution for a company with a central office with several branch locations geographically dispersed. You are given the following requirements:
- provides a different bandwidth at each location,
- has any-to-any connectivity,
- offloads some network responsibility.
- is inherently isolated.
- has a simple network design.
Which statement satisfies these requirements?

  • A. Implement Layer 2 VPN point-to-point circuits from each location to the central office.
  • B. Implement Layer 3 VPN services at each location
  • C. Implement WAN over the public Internet.
  • D. Implement services on a mesh of dark fiber between each location

Answer: A

 

NEW QUESTION 91
Your customer's enterprise is adding geographically-dispersed branch offices and requires new WAN connections. The primary design consideration for this expansion is low cost but the branches must remain secure with low latency.
Which type of Internet access model satisfies the customer's requirement in this scenario?

  • A. centralized model with security at each branch
  • B. centralized model with security at the hub
  • C. distributed model with security at each branch
  • D. distributed model with security at the hub

Answer: C

 

NEW QUESTION 92
You are implementing an MPLS-based WAN environment to connect remote sites to the corporate headquarters (HQ) However, the service provider at the HQ location does not provide service at the location of one of the remote sites.
Which statement is true in this scenario?

  • A. A circuit can be bridged across multiple service providers for end-to-end connectivity.
  • B. A public WAN circuit can be provisioned over the Internet that will provide the same level of service.
  • C. A hub site in a location where both service providers have a presence will need to be deployed.
  • D. A dedicated leased line will need to be used to connect to the remote site.

Answer: A

 

NEW QUESTION 93
......

Pass Your JNCDS-SP JN0-1362 Exam on Nov 13, 2021 with 130 Questions: https://www.latestcram.com/JN0-1362-exam-cram-questions.html