Latest 2024 Realistic Verified 1z0-1054-23 Dumps - 100% Free 1z0-1054-23 Exam Dumps
Get 2024 Updated Free Oracle 1z0-1054-23 Exam Questions and Answer
NEW QUESTION # 10
You are setting up Close Monitor and want to view high-level profit and loss results for each ledger.
What should you associate with the ledger set to achieve this?
- A. Financial Reporting Web Studio report
- B. OTBI report
- C. Account group
- D. Trial Balance report
Answer: A
Explanation:
Explanation
To view high-level profit and loss results for each ledger in the Close Monitor, you need to associate a Financial Reporting Web Studio report with the ledger set. This report should be based on the General Ledger Balances cube and should include the Income Statement account group as a row dimension. The report should also have the ledger set as a point of view dimension and the period and currency as user prompts. This way, you can select the ledger set, period, and currency when you run the report from the Close Monitor and see the aggregated income statement results for each ledger and consolidation node in the ledger set hierarchy. References: Overview of Close Monitor, Using General Ledger, Close Monitor Issue
NEW QUESTION # 11
Your ledger currency is USD. At month end, you have a balance on the Accounts Payable Liability Account of
100,000 Euros, which is equivalent to 136,550 USD. This balance needs to be revalued. The month-end exchange rate for revaluation is 1 Euro = 1.3755 USD.
What two statements are true about the resulting revaluation run?
- A. The original journal entry in Euros is updated.
- B. There is no unrealized exchange gain or loss calculated.
- C. You have an unrealized exchange loss recorded.
- D. You have an unrealized exchange gain recorded.
- E. The original journal entry in Euros remains the same.
Answer: C,E
Explanation:
Explanation
The revaluation process is used to adjust account balances denominated in a foreign currency. Revaluation adjustments represent the difference in account balances due to changes in conversion rates between the date of the original journal and the revaluation date. These adjustments are posted through journal entries to the underlying accountwith the offset posted to an unrealized gain or loss account. The two statements that are true about the resulting revaluation run are:
You have an unrealized exchange loss recorded: Since the ledger currency (USD) has depreciated against the foreign currency (Euro) from the date of the original journal to the revaluation date, the account balance in USD has increased. This means that you have a loss on the
NEW QUESTION # 12
Which two statements are true about infotiles and infolets?
- A. You can create your own user-defined infolets.
- B. Infotiles have Front view. Back view, and Expanded view.
- C. You can refresh infolets to see up-to-date data.
- D. Infotiles pull data from a Smart View analysis.
- E. Infolets are accessed only from the News Feed home page layout.
Answer: B,C
Explanation:
Explanation
Infotiles and infolets are graphical components that display key information and metrics on the General Accounting dashboard. They help users access many sources of information across the enterprise in an efficient, timely, and engaging manner. Infolets can be refreshed to see up-to-date data by clicking the Refresh icon on the infolet. Infotiles have three views: Front view, which shows a summary of the most important information; Back view, which shows additional details and actions; and Expanded view, which shows a full-screen view of the infotile content. References:
Oracle Financials Cloud: Using General Ledger, Chapter 6: Financial Reporting and Analysis, Section:
General Accounting Infolets
Oracle Financials Cloud: Implement General Ledger, Chapter 1: Overview of Oracle Financials Cloud, Section: Overview of Using Infolets to Identify Issues and Prioritize Tasks
NEW QUESTION # 13
You have redesigned your chart of accounts and need to update your existing cross-validation rules. There is a requirement for new rules; some simply need to be updated and others need to be deleted.
What is the most efficient way to achieve this?
- A. by using Cross-Validation Rules Import file-based data import (FBDI).
- B. by using the Manage General Ledger Security page.
- C. by creating Cross-Validation Rules desktop-integrated spreadsheet.
- D. by using the Manage Cross-Validation Rules page.
Answer: A
Explanation:
Explanation
According to Oracle documentation1, the most efficient way to update your existing cross-validation rules when you have redesigned your chart of accounts is to use Cross-Validation Rules Import file-based data import (FBDI). FBDI enables you to import cross-validation rules from a spreadsheet template into General Ledger. You can use FBDI to create new rules, update existing rules, or delete rules. Therefore, option C is correct. Option A is incorrect because using the Manage General Ledger Security page does not enable you to update cross-validation rules. Option B is incorrect because creating Cross-Validation Rules desktop-integrated spreadsheet does not enable you to update cross-validation rules. Option D is incorrect because using the Manage Cross-Validation Rules page does not enable you to update cross-validation rules efficiently.
According to Oracle documentation2, you should create a Data Access Set that allows access to the UK Ledger to allow users with the General Accountant job role to access the UK Ledger. A Data Access Set is a security feature that defines the ledgers and balancing segment values that a user can access. You can assign Data Access Sets to users or roles using the Manage Data Access for Users page. Therefore, option B is correct. Option A is incorrect because assigning the security context value of UK Ledger to the user/role combination does not enable access to the ledger. Option C is incorrect because assigning the General Accounting Manager role to those users does not enable access to the ledger. Option D is incorrect because assigning the UK reference set to the user/role combination does not enable access to the ledger.
NEW QUESTION # 14
In which two ways can your users personalize the Springboards and Work Areas to suit their individual working styles? (Choose two.)
- A. Users have very little control configuring their Springboards and Work Areas; they can only resize columns
- B. They can have the System Administrator configuring pages for them using Page Composer
- C. They can format certain tables by hiding and showing columns, moving columns, and resizing columns
- D. They can use "+" under the Apps section of the News Feed homepage
Answer: C,D
Explanation:
Explanation
According to Oracle documentation2, your users can personalize the Springboards and Work Areas to suit their individual working styles in these two ways: They can format certain tables by hiding and showing columns, moving columns, and resizing columns, and they can use "+" under the Apps section of the News Feed homepage. Springboards and Work Areas are user interface components that enable users to access tasks and information relevant to their roles. Users can customize these components by adding or removing tiles, changing layouts, filtering data, and formatting tables. Therefore, options A and D are correct. Option B is incorrect because users have more control over configuring their Springboards and Work Areas than just resizing columns. Option C is incorrect because users do not need to have the System Administrator configuring pages for them using Page Composer.
NEW QUESTION # 15
You have a requirement to have invoices generated for certain Intercompany transactions.
Where do you enable invoicing?
- A. the transaction category
- B. the transaction batch
- C. the transaction source
- D. the transaction type
Answer: D
Explanation:
Explanation
According to Oracle documentation2, you enable invoicing for certain Intercompany transactions on the transaction type. The transaction type defines the characteristics of an intercompany transaction, such as whether it requires approval, whether it generates invoices, and what accounting rules apply. You can enable invoicing for a transaction type by selecting the Invoicing Options tab and choosing the invoice method, invoice source, invoice batch source, and invoice rule. Therefore, option D is correct. Option A is incorrect because you do not enable invoicing on the transaction batch. Option B is incorrect because you do not enable invoicing on the transaction category. Option C is incorrect because you do not enable invoicing on the transaction source.
NEW QUESTION # 16
You have three ledgers that use the same chart of accounts with one intercompany payable and one intercompany receivable account. The chart of accounts also has an intercompany segment. Each ledger has one legal entity assigned to it and each legal entity is associated with one balancing segment value.
At what level should you define the default intercompany balancing rule?
- A. Ledger-level rule
- B. Primary balancing segment rule
- C. Legal entity-level rule
- D. Chart of accounts rule
Answer: D
Explanation:
Explanation
You should define the default intercompany balancing rule at the legal entity level, because each ledger has one legal entity assigned to it and each legal entity is associated with one balancing segment value. This way, you can specify the intercompany receivables and payables accounts for each legal entity and ensure that the journals are balanced by legal entity or primary balancing segment values. A ledger-level rule would apply to all legal entities in the ledger, which may not be appropriate if they have different intercompany accounts. A primary balancing segment rule would apply to all ledgers that share the same chart of accounts, which may not be desirable if they have different intercompany rules. A chart of accounts rule would apply to all ledgers and legal entities that use the same chart of accounts, which may not be feasible if they have different intercompany segments or accounts. References:
Intercompany Balancing Rules, Section: Define Intercompany Balancing Rules Overview of Intercompany Balancing Rules, Section: Define Intercompany Balancing Rules Troubleshooting Guide For Intercompany Balancing, Section: 1. Journals and subledger accounting entries are not being balanced for intercompany activity Implement General Ledger, Section: Intercompany Balancing
NEW QUESTION # 17
Challenge 2
Manage Shorthand Aliases
Scenario
Your client intends to utilize the Shorthand Aliasfeature and would like to see how the aliases willappear when entering transactions.
Task 2
Create a shorthand alias for the US Chart of Accounts to record Revenue Domestic for Supremo Fitness, Line of Business 2, and US Operations Cost Center.
Note:
. Prefix your alias name with 07, where 07 is your exam ID.
. There is no Product or Intercompany impact.
Answer:
Explanation:
See the Explanation for the complete Solution.
Explanation
Here are the steps you need to follow:
In the Setup and Maintenance work area, go to the following:
Offering: Financials
Functional Area: Financial Reporting Structures
Task: Manage Shorthand Aliases
Select the chart of accounts that you want to create the alias for. In this case, it is the Corporate chart of accounts.
Click on the Add Row icon to create a new alias. Enter the following information:
Alias Name: RevDom
Account Template: 101-2000-400000-000-000-000
Description: Revenue Domestic for Supremo Fitness, Line of Business 2, and US Operations Cost Center Enabled: Yes Start Date: Today's date End Date: Blank Click on the Save and Close button to save the alias.
You have successfully created a shorthand alias for the US Chart of Accounts. For more information, you can refer to the following resources:
Account Aliases
Enter a GL Account Alias
Short Hand Alias in Fusion Financials Key Flexfield
How to Enable Account Shorthand Aliases
NEW QUESTION # 18
An Oracle Fusion Cloud customer has a complex enterprise structure that includes multiple legal entities in multiple countries. To match the intercompany balancing requirements, all four levels of rules have been defined. In user testing, the business experts are asking which rule will be considered first when balancing an intercompany journal?
- A. Ledger-level rule
- B. Primary balancing segment rule
- C. Chart of accounts rule
- D. Legal entity-level rule
Answer: B
Explanation:
Explanation
When balancing an intercompany journal, Oracle Fusion Cloud will first look for a primary balancing segment rule that matches the provider and receiver primary balancing segment values. If such a rule exists, it will be used to generate the intercompany receivables and payables accounts. If not, Oracle Fusion Cloud will look for a chart of accounts rule, then a legal entity-level rule, and finally a ledger-level rule. The primary balancing segment rule has the highest priority and the ledger-level rule has the lowest priority. References:
Overview of Intercompany Balancing Rules
Intercompany Balancing Rules
Troubleshooting Guide For Intercompany Balancing
Example of Generating Intercompany Receivables and Intercompany Payables Accounts
NEW QUESTION # 19
The Cloud Client wants to add a global branding logo and more predefined transactional attributes to the journal approval email notification.
Which two Business Intelligence catalog objects should you copy (or customize) and edit? (Choose two.)
- A. The Data Model
- B. The Sub_Template
- C. The Data Source
- D. The layout-Template
- E. Output type
Answer: A,D
Explanation:
Explanation
To add a global branding logo and more predefined transactional attributes to the journal approval email notification, you should copy (or customize) and edit the layout template and the data model. The layout template is a file that defines the appearance and content of the notification, such as text, images, tables, or charts. The data model is a file that defines the data sources and queries that provide data for the notification, such as predefined transactional attributes. You can copy (or customize) and edit the layout template and the data model using Oracle Analytics Publisher reports. You do not need to copy (or customize) and edit the output type, as this is a setting that determines the format of the notification output, such as HTML or PDF.
You do not need to copy (or customize) and edit the data source, as this is a component of the data model that specifies where data for the notification comes from, such as an SQL query or an XML file. You do not need to copy (or customize) and edit the sub template, as this is a file that contains reusable content or logic that can be referenced by multiple layout templates. Reference: Oracle Financials Cloud: General Ledger 2022 Implementation Professional Objectives - Configure Workflow Approvals and Notifications 12
NEW QUESTION # 20
You have just been hired to add a new subsidiary to the corporate enterprise structure in the customer's Oracle Fusion Cloud.
The subsidiary will capture transaction information from subledgers in the local currency and under International Financial Reporting standards (IFRS) and local GAAP for corporate reporting requirements, which will report via the use of a secondary ledger.
The secondary ledger is used only at period end; there is no need to have real-time transaction or Journal details. It is noted that most of the accounting between IFRS and Corporate GAAP is similar.
Which conversion level would you recommend to keep a thin secondary ledger?
- A. Adjustment only
- B. Sub-ledger level.
- C. Balance level
- D. Journal ledger
Answer: C
Explanation:
Explanation
To keep a thin secondary ledger, you should select the balance level as the data conversion level. This means that only the ending balances of the primary ledger are copied to the secondary ledger at the end of each period. This reduces the data volume and storage requirements of the secondary ledger, as well as the processing time and resources needed to copy the data. The balance level conversion is suitable for scenarios where the accounting methods or charts of accounts are similar between the primary and secondary ledgers, and there is no need to maintain detailed journals or subledger transactions in the secondary ledger. References: Primary Ledgers, Secondary Ledgers, and Reporting Currencies, How Journals Are Copied from Primary to Secondary Ledgers When ..., GL Secondary Ledger Conversion Level Change
NEW QUESTION # 21
Your ledger currency is USD. At month end you have a balance on the Accounts Payable Liability Account of
100,000 Euros which is equivalent to USD 136,550. This balance needs to be revalued.
The month end exchange rate for revaluation is 1 Euro = 1.3755 USD.
What two statements are true for the resulting revaluation run? (Choose two.)
- A. The original journal entry in Euros is updated.
- B. There is no unrealized exchange gain or loss calculated.
- C. You have an unrealized exchange loss recorded.
- D. The original journal entry in Euros remains the same.
- E. You have an unrealized exchange gain recorded.
Answer: C,E
Explanation:
Explanation
The two true statements for the resulting revaluation run are that you have an unrealized exchange gain recorded and you have an unrealized exchange loss recorded. Revaluation is a process that adjusts foreign currency balances to reflect current exchange rates at period end. Revaluation creates journal entries to record unrealized exchange gains or losses on foreign currency balances based on revaluation rates defined for each currency. In this scenario, you have a balance on the Accounts Payable Liability Account of 100,000 Euros which is equivalent to USD 136,550 at month end. The month end exchange rate for revaluation is 1 Euro =
1.3755USD. Therefore, after revaluation, your balance on the Accounts Payable Liability Account will be USD 137,550 (100,000 x 1.3755). This means you have an unrealized exchange gain of USD 1,000 (137,550 -
136,550) on your Accounts Payable Liability Account because your liability in foreign currency has decreased in terms of your ledger currency due to exchange rate fluctuations. Revaluation will create a journal entry to debit your Accounts Payable Liability Account by USD 1,000 and credit your Unrealized Exchange Gain Account by USD 1,000 to record this gain. The original journal entry in Euros is not updated by revaluation, as revaluation only creates new journal entries to adjust foreign currency balances in terms of ledger currency based on revaluation rates. There is no unrealized exchange gain or loss calculated by revaluation, as revaluation does calculate unrealized exchange gains or losses on foreign currency balances based on revaluation rates.
NEW QUESTION # 22
Your customer uses Financials Cloud, Projects, Inventory, and SCM.
Which two statements are true regarding intercompany accounting for these products? (Choose two.)
- A. Each product has its own Intercompany Accounting feature that needs to be configured separately.
- B. In Financials Cloud, Intercompany Balancing Rules are used to balance both cross-ledger allocation journals and single-ledger journals.
- C. Intercompany balancing rules in General Ledger need to be mapped with the intercompany configuration in each product.
- D. Intercompany Balancing Rules are defined centrally and applied across Financials and Projects.
Answer: A,D
Explanation:
Explanation
According to Oracle documentation1, the following statements are true regarding intercompany accounting for Financials Cloud, Projects, Inventory, and SCM: Each product has its own Intercompany Accounting feature that needs to be configured separately, and Intercompany Balancing Rules are defined centrally and applied across Financials and Projects. Intercompany accounting is the process of recording transactions between related entities within an enterprise or between groups in the same legal entity. Each product has its own Intercompany Accounting feature that enables you to create, process, and reconcile intercompany transactions.
Intercompany Balancing Rules are used to generate balancing entries for journals that are out of balance by legal entity or primary balancing segment values. Intercompany Balancing Rules are defined in General Ledger and applied across Financials and Projects. Therefore, options A and C are correct. Option B is incorrect because Intercompany Balancing Rules are not used to balance cross-ledger allocation journals.
Option D is incorrect because Intercompany balancing rules in General Ledger do not need to be mapped with the intercompany configuration in each product.
NEW QUESTION # 23
You are using Oracle General Ledger (GL), Oracle Payables, and Oracle Receivables and you want to prevent the closure of the GL period if the corresponding subledger period is not closed. How do you achieve this?
- A. You don't have to do anything; this option is enabled automatically.
- B. Set the relevant option on the Specify Ledger Options page.
- C. Set the ORA_GLJNCLD_STRICT_PRD_CLOSE profile option to yes.
- D. Opt in to the Prevent Period Close option for the offering.
Answer: B
Explanation:
Explanation
You can prevent the closure of a General Ledger accounting period if the accounting period for any of the corresponding subledgers is still open, or if incomplete accounting entries or transactions exist for the period.
This can help ensure an effective period close process that validates all transactions are complete and aren't held up during the close. To enable this feature, you need to set the relevant option on the Specify Ledger Options page for each primary ledger. The option is called Prevent General Ledger Period Closure When Open Subledger Periods Exist and it is located in the Period Close section. You can also specify which subledgers to include or exclude from the validation, except for Assets, which is automatically excluded by default.
References:
How to Prevent a General Ledger Period from Closing When Open Subledger Periods Exist Period Close Components Review: Prevent General Ledger Period Closure When Open Subledger Periods Exist
NEW QUESTION # 24
In the implementation project, there is a requirement to add new transactional attributes to the journal approval notification.
Which two Business Intelligence catalog objects should you copy (or customize) and edit? (Choose two.)
- A. The Sub Template
- B. The Data Model
- C. The layout Template
- D. The Style Template
- E. Output type
Answer: B,E
Explanation:
Explanation
To add a global branding logo and more predefined transactional attributes to the journal approval email notification, you should copy (or customize) and edit the layout template and the data model. The layout template is a file that defines the appearance and content of the notification, such as text, images, tables, or charts. The data model is a file that defines the data sources and queries that provide data for the notification, such as predefined transactional attributes. You can copy (or customize) and edit the layout template and the data model using Oracle Analytics Publisher reports. You do not need to copy (or customize) and edit the output type, as this is a setting that determines the format of the notification output, such as HTML or PDF.
You do not need to copy (or customize) and edit the style template, as this is a file that defines the styles and formatting of the notification elements, such as fonts, colors, or margins. You do not need to copy (or customize) and edit the sub template, as this is a file that contains reusable content or logic that can be referenced by multiple layout templates. Reference: Oracle Financials Cloud: General Ledger 2022 Implementation Professional Objectives - Configure Workflow Approvals and Notifications 12
NEW QUESTION # 25
After completing a business requirement mapping session, it has been decided that only single Currency Journals will be entered for this Company.
To achieve this requirement, on which two objects should you enable "Limit a Journal to a Single Currency"?
(Choose two.)
- A. Profile option
- B. Journal sources
- C. Journal lookup codes
- D. Ledger options
- E. Journal category
Answer: B,D
Explanation:
Explanation
To achieve the requirement of only single currency journals being entered for this company, you should enable
"Limit a Journal to a Single Currency" on both ledger options and journal sources. Ledger options are settings that apply to a specific ledger, such as journal processing options, currency options, and average balance processing options. Journal sources are identifiers that indicate where a journal originated, such as manual entry, subledger accounting, or import. Youcan enable "Limit a Journal to a Single Currency" on both ledger options and journal sources using the Specify Ledger Options and Manage Journal Sources tasks in Setup and Maintenance. This will enforce single currency journals for journals entered on the Create Journal page and for journals that are imported. You do not need to enable "Limit a Journal to a Single Currency" on journal lookup codes, as these are codes that indicate the status of a journal, such as Entered, Posted, or Reversed. You do not need to enable "Limit a Journal to a Single Currency" on journal category, as this is an attribute that classifies journals by purpose or function, such as Purchase Invoices or Allocations. You do not need to enable "Limit a Journal to a Single Currency" on profile option, as this is a setting that affects the behavior of an application or feature for a user or responsibility. Reference: Oracle Financials Cloud: General Ledger 2022 Implementation Professional Objectives - Define Ledgers 12
NEW QUESTION # 26
For translation purposes, the Financials reporting team has decided to load the monthly Historical currency rates by using File-Based Data Interface (FBDI).
What happens to the existing historical rate for a specific ledger, currency, account combination, and accounting period if they use insert in the spreadsheet?
- A. Nothing, existing historical rates are not updated.
- B. The historical rate is replaced.
- C. Historical rates are converted into an average rate (original and new rate).
- D. The existing historical rate is deleted.
Answer: B
Explanation:
Explanation
If you use insert in the spreadsheet to load the monthly historical rates by using FBDI, the existing historical rate for a specific ledger, currency, account combination, and accounting period will be replaced by the new rate. This is because the insert action will overwrite the existing rate with the new rate in the GL_HISTORICAL_RATES_INT table. If you want to preserve the existing rate, you should use update or delete actions instead. References:
How Historical Rates Import Data Is Processed, Section: Use the Historical Rates Import file-based data import (FBDI) template to import historical rates from external and legacy sources to Oracle General Ledger Import Historical Rates, Section: Details Entering Historical Rates, Section: Entering Historical Rates
NEW QUESTION # 27
You are using the Create Budgets in a Spreadsheet option to load your budget balances into the General Ledger balances cube. Your FYXX Budget is not appearing in the Budget Name list of values.
What are two reasons for this?
- A. Transfer Budget Balances to Budget Cubes has not been run.
- B. Publish Chart of Accounts Dimension Members and Hierarchies to the Balances Cube has not been run.
- C. Budgeting is not enabled in the Ledger options.
- D. The Create Scenario Dimension Members program has not been run.
- E. A value for the budget scenario is not created.
Answer: D,E
Explanation:
Explanation
To use the Create Budgets in a Spreadsheet option, you need to have a budget scenario value and a scenario dimension member for your budget. A budget scenario value is a user-defined value that identifies a budget, such as FYXX Budget. A scenario dimension member is a member of the scenario dimension in the General Ledger balances cube that corresponds to a budget scenario value, such as FYXX_Budget. You can create budget scenario values and scenario dimension members using the Manage Budget Scenario Values task or the Create Scenario Dimension Members program. If you do not create these values and members, your budget will not appear in the Budget Name list of values in the spreadsheet. Therefore, the two reasons for your issue are:
A value for the budget scenario is not created: You need to create a budget scenario value for your budget using the Manage Budget Scenario Values task. This task enables you to define and maintain budget scenario values and their attributes, such as description, start date, end date, and status. You can also specify whether the budget scenario value is enabled for budgeting and reporting. You need to enable the budget scenario value for budgeting to use it in the spreadsheet.
The Create Scenario Dimension Members program has not been run: You need to run the Create Scenario Dimension Members program to create scenario dimension members for your budget scenario values. This program automatically creates scenario dimension members for all budget scenario values that are enabled for budgeting and do not have existing scenario dimension members. You can run this program manually or schedule it to run periodically. You need to run this program after you create or update budget scenario values to ensure that they are reflected in the scenario dimension.
References:
Create Budgets in a Spreadsheet
Manage Budget Scenario Values
Create Scenario Dimension Members
NEW QUESTION # 28
You are using account hierarchies for reporting and allocations.
Which two statements are true about these types of hierarchies? (Choose two.)
- A. Hierarchies for reporting and allocations do not have to be published to Essbase cubes.
- B. Child values in these hierarchies can belong to only one parent.
- C. Hierarchies for reporting and allocations have to be published to Essbase cubes.
- D. You can have only one version of a hierarchy published to the Essbase cube at any time.
Answer: B,D
Explanation:
Explanation
According to the Oracle documentation34, account hierarchies are defined in Oracle Fusion applications using tree functionality. Each account hierarchy is defined as a tree with one or more versions. You can have only one version of a hierarchy published to the Essbase cube at any time (option A). Child values in these hierarchies can belong to only one parent (option D). Option B is incorrect becausehierarchies for reporting and allocations must be published to Essbase cubes5. Option C is incorrect because it contradicts option B.
NEW QUESTION # 29
On a primary ledger in the system options close section, the following field has been selected 'Prevent General Ledger Period Closure When Open Subledger Periods Exist'.
For which three subledgers can you opt out of the period close checking feature by using the lookup ORA_GL_INCLD_STRICT_PRD_CLOSE? (Choose three.)
- A. Receipt accounting
- B. Order Management
- C. Revenue Management
- D. Assets
- E. Receivables
Answer: A,D,E
Explanation:
Explanation
According to Oracle documentation3, you can opt out of the period close checking feature for these three subledgers by using the lookup ORA_GL_INCLD_STRICT_PRD_CLOSE: Receipt accounting, Receivables, and Assets. The period close checking feature prevents you from closing a General Ledger period if there are any open subledger periods that exist for that ledger. You can opt out of this feature for specific subledgers by using the lookup ORA_GL_INCLD_STRICT_PRD_CLOSE and setting the Enabled flag to No for those subledgers.Therefore, options A, B, and D are correct. Option C is incorrect because Revenue Management is not a subledger that can be opted out of the period close checking feature. Option E is incorrect because Order Management is not a subledger that can be opted out of the period close checking feature.
NEW QUESTION # 30
Which two allow access to the BI Catalog for creating an Oracle Transactional Business Intelligence analysis?
(Choose two.)
- A. Universal Content Management Workspace
- B. Business Process Management Workspace
- C. Scheduled Processes
- D. Enterprise Performance Management Workspace
- E. Reports and Analytics
Answer: D,E
Explanation:
Explanation
The two options that allow access to the BI Catalog for creating an Oracle Transactional Business Intelligence analysis are Reports and Analytics and Enterprise Performance Management Workspace. Reports and Analytics is a tool that allows users to access, create, edit, and share reports and analyses using data from various sources, including Oracle Transactional Business Intelligence. Users can access Reports and Analytics from variouspages in Oracle Fusion Applications or from Oracle Fusion Cloud Service Console. Enterprise Performance Management Workspace is a tool that allows users to access, create, edit, and share reports and analyses using data from various sources, including Oracle Transactional Business Intelligence. Users can access Enterprise Performance Management Workspace from Oracle Fusion Cloud Service Console or from a web browser. Universal Content Management Workspace is not an option that allows access to the BI Catalog for creating an Oracle Transactional Business Intelligence analysis, as this is a tool that allows users to manage documents and other digital content in Oracle Fusion Applications. Business Process Management Workspace is not an option that allows access to the BI Catalog for creating an Oracle Transactional Business Intelligence analysis, as this is a tool that allows users to monitor and manage business processes in Oracle Fusion Applications. Scheduled Processes is not an option that allows access to the BI Catalog for creating an Oracle Transactional Business Intelligence analysis, as this is a tool that allows users to submit, monitor, and manage scheduled processes in Oracle Fusion Applications. Reference: Oracle FinancialsCloud: General Ledger 2022 Implementation Professional Objectives - Use Oracle Transactional Business Intelligence (OTBI) 12
NEW QUESTION # 31
......
1z0-1054-23 Dumps PDF and Test Engine Exam Questions: https://www.latestcram.com/1z0-1054-23-exam-cram-questions.html
Get New 1z0-1054-23 Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=1SkoxcQ-EEv-DNEELu3mJNWNVo6acJ_aA
