[Jan-2022] Use Real C1000-018 Dumps - 100% Free C1000-018 Exam Dumps [Q18-Q36]

Share

[Jan-2022] Use Real C1000-018 Dumps - 100% Free C1000-018 Exam Dumps

C1000-018 PDF Dumps Exam Questions – Valid C1000-018 Dumps

NEW QUESTION 18
What event information within an offense would provide the analyst with a deep insight as to how it was created?

  • A. Event Payload
  • B. Event Category
  • C. Event QID
  • D. Event Magnitude

Answer: D

 

NEW QUESTION 19
When an analyst sees the system notification "The appliance exceeded the EPS or FPM allocation within the last hour", how does the analyst resolve this issue? (Choose two.)

  • A. Tune the system to reduce the volume of events and flows that enter the event pipeline.
  • B. Delete the volume of events and flows received in the last hour.
  • C. Tune the system to reduce the time window from 60 minutes to 30 minutes.
  • D. Adjust the license pool allocations to increase the EPS and FPM capacity for the appliance.
  • E. Adjust the resource pool allocations to increase the EPS and FPM capacity for the appliance.

Answer: A,D

Explanation:
Explanation
User response
Adjust the license pool allocations to increase the EPS and FPM capacity for the appliance.
Tune the system to reduce the volume of events and flows that enter the event pipeline.

 

NEW QUESTION 20
Which statement about False Positive Building Blocks applies?
Using False Positive Building Blocks:

  • A. has no impact on unwanted alerts, but it does reduce the performance impact of testing rules that do not need to be tested.
  • B. helps to prevent unwanted alerts, and reduces the performance impact of testing rules that do not need to be tested.
  • C. has no impact on unwanted alerts, or performance.
  • D. helps to prevent unwanted alerts, but there is no effect on performance.

Answer: D

 

NEW QUESTION 21
An analyst wants to create a report using the report wizard.
What are key elements used by the wizard to create the report?

  • A. Layout, container, content
  • B. Report templates, layout, content.
  • C. Report templates, layout, saved searches
  • D. Report templates, user groups, permissions.

Answer: B

 

NEW QUESTION 22
An analyst observed a port scan attack on an internal network asset from a remote network.
Which filter would be useful to determine the compromised host?

  • A. Destination IP [Indexed]
  • B. Source IP [Indexed]
  • C. Source or Destination IP
  • D. Any IP

Answer: D

 

NEW QUESTION 23
While creating a new custom property, which is a valid property types selection?

  • A. Event Based
  • B. AQL Based
  • C. Flow Based
  • D. Regular Expressions Based

Answer: D

Explanation:
Explanation
https://www.ibm.com/docs/en/qsip/7.4?topic=qradar-custom-property-definitions-in-dsm-editor

 

NEW QUESTION 24
An analyst is working on Offense management and finds that a few of the offenses are not being removed from the Offense tab even after the Offense retention period has elapsed.
What could be the reason that these offenses are not being removed?

  • A. Offense is inactive
  • B. Offense has been annotated
  • C. Offense is protected
  • D. Offense is released

Answer: C

Explanation:
Explanation
https://www.ibm.com/docs/en/qsip/7.4?topic=management-offense-retention

 

NEW QUESTION 25
To provide insight into why QRadar considers the event to be threatening, what does QRadar add to the Offense that users cannot edit or delete?

  • A. Source IP
  • B. Location
  • C. Annotations
  • D. Attack path

Answer: C

 

NEW QUESTION 26
An analyst wants to view information about repeated offenders and IP addresses that generate many attacks or are subject to many attacks.
What should the analyst choose from the navigation options in the Offense tab?

  • A. By Source IP or By Destination IP
  • B. By Event or By Flows
  • C. By Log Source IP or By Event Source
  • D. By Event Category or By Event Source

Answer: A

Explanation:
Explanation
Use the navigation options on the left to view the offenses from different perspectives. For example, select By Source IP or By Destination IP.

 

NEW QUESTION 27
Where can an analyst investigate a security incident to determine the root cause of an issue, and then work to resolve it?

  • A. Risk tab
  • B. Network Activity tab
  • C. Vulnerabilities tab
  • D. Offense tab

Answer: C

 

NEW QUESTION 28
What is the reason for this system notification?
"Time synchronization to primary or Console has failed"

  • A. Deny ntpdate communication on port 423.
  • B. Deny ntpdate communication on port 223.
  • C. Deny ntpdate communication on port 123
  • D. Deny ntpdate communication on port 323.

Answer: D

 

NEW QUESTION 29
An analyst is investigating access to sensitive data on a Linux system. Data is accessible from the /secret directory and can be viewed using the 'sudo oaf command. The specific file /secret/file_08-txt was known to be accessed in this way. After searching in the Log Activity Tab, the following results are shown.

When interpreting this, the analyst is having trouble locating events which show when the file was accessed.
Why could this be?

  • A. The 'LinuxServer @ centos' log source has coalescing configured and the specific event for that file can only be accessed by clicking on the 'Event Count' value.
  • B. The 'LinuxServer @ cantos' log source has boon configured as a Faise Positive and the specific event for that file has been dropped.
  • C. The 'LinuxServer @ centos' log source has not been configured to send the relevant events to QRadar.
  • D. The ;LinuxServer @ centos; log source has coalesscing conigured and the specific event for that file has been discardedd.

Answer: A

 

NEW QUESTION 30
The SOC team complained that they have can only see one Offense in the Offenses tab.
space of 10 minutes, but the analyst How can the analyst ensure only one email is sent in this circumstance?

  • A. Add a Response Limiter to the Rule, configured to execute only once every 30 minutes.
  • B. Configure the postfix mail server on the Console to suppress duplicate items
  • C. Ensure that the Rule Action Limiter is configured the same way as the Rule Response Limiter.
  • D. Disable Automated Offense Notification - by email, in Advanced System Settings.

Answer: B

 

NEW QUESTION 31
What is the reason for this system notification?
"Time synchronization to primary or Console has failed"

  • A. Deny ntpdate communication on port 323.
  • B. Deny ntpdate communication on port 423.
  • C. Deny ntpdate communication on port 123
  • D. Deny ntpdate communication on port 223.

Answer: C

Explanation:
Explanation
38750129 - Time synchronization to primary or Console has failed.
The managed host cannot synchronize with the console or the secondary HA appliance cannotsynchronize with the primary appliance.
Administrators must allow ntpdatecommunication on port 123.

 

NEW QUESTION 32
A new analyst is tasked to identify potential false positive Offenses, then send details of those Offenses to the Security Operations Center (SOC) manager for review by using the send email notification feature.

  • A. Total number of sources, top five sources by magnitude, total number of destinations, destination networks, total number of packets.
  • B. Total number of sources, top five sources by magnitude, total number of destinations, destination networks, total number of events.
  • C. Total number of sources, top five categories, total number of destinations. Contributing CRE rules total number of packets.
  • D. Total number of sources, top five number of categories, total number of destinations, destination networks, total number of packets.

Answer: D

 

NEW QUESTION 33
Which QRadar component stores Event data?

  • A. Event Collector
  • B. Event Processor
  • C. Flow Collector
  • D. App Host

Answer: D

 

NEW QUESTION 34
An analyst needs to perform a Quick search to find events under the Log Activity tab that contains an 'exe' file during a certain time period.
How can the analyst do this?

  • A. On the Search bar select Quick Filter, insert: 'exe, last 1 hour' into the filter criteria, then click Search.
  • B. On the Search bar select Quick Filter, then insert filter criteria for '/*.exe/' and then select a time interval from the view option's drop down.
  • C. Select Search - New Search from the menu bar, then select all the search criteria required from the UI options provided.
  • D. Select Quick Searches on the menu bar, then go through the list of saved searches available to see if one already exists, that can be altered.

Answer: B

 

NEW QUESTION 35
An analyst noticed that from a particular subnet (203.0.113.0/24), all IP addresses are simultaneously trying to reach out to the company's publicly hosted FTP server.
The analyst also noticed that this activity has resulted in a Type B Superflow on the Network Activity tab-Under which category, should the analyst report this issue to the security administrator?

  • A. Syn Flood
  • B. Network Scan
  • C. Port Scan
  • D. DDoS

Answer: A

Explanation:
Explanation
https://www.ibm.com/docs/en/SS42VS_7.3.3/com.ibm.qradar.doc/b_qradar_admin_guide.pdf

 

NEW QUESTION 36
......


IBM C1000-018 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Explain Offense details on offense details view, why/how it was created
  • Distinguish when an event has coalesced information in it
Topic 2
  • Review security access trends and anomalies
  • Identify contributing event and or flow information for an offence
Topic 3
  • Explain the different uses for each search type (ie., filtered, Quick and Advanced)
  • Distinguish offenses from triggered rules
Topic 4
  • Review security risks and network vulnerabilities detected by QRadar
  • Report rule usage and offenses generated by those rules
Topic 5
  • Report any agents or log sources that are not reporting to QRadar on a regular basis
  • Identify and escalate issues with regards to QRadar health and functionality
Topic 6
  • Break down triggered rules to identify the reason of the offense
  • Distinguish potential threats from probable false positives
Topic 7
  • Discuss the content of an event or flow, including the normalized fields
  • Report any abnormal security access trends and events to security admins
Topic 8
  • Illustrate the difference between rule responses and rule actions
  • Describe the use of the magnitude of an offense
Topic 9
  • Review the vulnerabilities and threat assessment of the hosts that are involved in the offense
  • Navigate to, from and within an offense
Topic 10
  • Extract information for regular or adhoc distribution to consumer of outputs
  • Interpret rules that test for regular expressions
Topic 11
  • Review outputs in all available QRadar Tabs
  • Illustrate the impact of QRadar property indexes
Topic 12
  • Perform initial investigation of alerts and offenses created by QRadar
  • Demonstrate how to export Flow/Event data for external analysis
Topic 13
  • Share findings about offenses by distributing offense detail via email
  • Identify and escalate undesirable rule behavior to administrator

 

Ultimate C1000-018 Guide to Prepare Free Latest IBM Practice Tests Dumps: https://www.latestcram.com/C1000-018-exam-cram-questions.html