[Dec 06, 2023] Ultimate NCP-MCI-6.5 Guide to Prepare Free Latest Nutanix Practice Tests Dumps
Get Top-Rated Nutanix NCP-MCI-6.5 Exam Dumps Now
NEW QUESTION # 61
The Stargate service becomes unavailable on a single CVM on an AHV node. What is used to maintain I/O operations in the cluster?
- A. iSCSl redirector
- B. ha.py
- C. Hypervisor HA
- D. Route injection
Answer: A
NEW QUESTION # 62
Async DR is configured between two sites. A network outage occurs at the primary site.
Which steps must the administrator perform to bring the VMs back into service at the backup site?
Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.
Answer:
Explanation:
NEW QUESTION # 63
What is the name of the internal bridge used by AHV nodes and CVMs?
- A. br0
- B. vnet0
- C. br1
- D. virbr0
Answer: A
Explanation:
According to the Nutanix Support & Insights web search result1, the name of the internal bridge used by AHV nodes and CVMs is br0. The internal bridge is an Open vSwitch (OVS) bridge that connects the AHV host management interface, the CVM interface, and the VM vNICs. The internal bridge also acts as a gateway for the CVM and VM traffic to reach the external network through the host physical NICs.
NEW QUESTION # 64
When a VM is connected to a Nutanix managed network, when is the IP addressed assigned?
- A. When the VM is powered on.
- B. When the vNIC is created on the VM.
- C. When the guest OS receives a DHCP acknowledge.
- D. When the guest OS sends a DHCP request.
Answer: C
NEW QUESTION # 65
Refer to the exhibit.
The Linux Admin role has been created to manage only Linux VMs in the environment. However, the Admin1 user does not have access to all Linux VMs.
What step should be taken to grant the proper access?
- A. Add the hosts to the entities KM for the role.
- B. Add the role to the Linux images.
- C. Add the proper category to each Linux VM.
- D. Grant the admin1 user the viewer role (or the cluster.
Answer: A
NEW QUESTION # 66
What is a requirement to enable Flow Neworking?
- A. Flow Micro segmentation must be enabled.
- B. A dedicated virtual switch has been created for Flow Networking.
- C. Microservices infrastructure must be enabled.
- D. Prims Central is using a three-node scale-out deployment
Answer: C
Explanation:
Flow Networking is a feature that enables software-defined networking for AHV clusters. It allows users to create and manage virtual private clouds (VPCs), subnets, and network services such as NAT, DHCP, routing, and VPN. Flow Networking also supports service insertion and chaining, which enables integration with third-party network functions such as firewalls and load balancers. Flow Networking is built on top of the microservices infrastructure (MSP) in Prism Central, which provides the platform for running various Nutanix services such as Calm, Karbon, and Objects. Therefore, to enable Flow Networking, the MSP must be enabled first on Prism Central1. The MSP can be enabled from the Prism Central settings page or from the command line interface (CLI) of the Prism Central VM2. Enabling the MSP will also enable Flow Microsegmentation, which is another feature that provides network security and visibility for AHV clusters.
NEW QUESTION # 67
Which AOS process determine if an I/O from a user will be written to OpLog or to an Extent Store?
- A. Zeus
- B. Stargate
- C. Cassandara
- D. Curtor
Answer: B
NEW QUESTION # 68
A newly-hired Nutanix administrator was tasked by the CIO to create a single VM on a test network. The network administrator stated that a native VLAN was used on the Cisco TOR switches with the following parameters:
IP address:172,16.1.2
Network Mask: 255.255.255.0
Default gateway: 172.16.1.1
VLAN:1
The same parameters were used to create a network profile on Nutanix, but the when the VM was on ...
What should the Nutanix administrator do to fix this issue?
- A. Nutanix removed support for native VLAN.
- B. Use DHCP as opposed to static IP
- C. Enable IPv6 on the VM.
- D. Change VLAN field from vlan. 1 to vlan.0.
Answer: D
NEW QUESTION # 69
Which component can be associated with a storage policy?
- A. Vm
- B. Subnet
- C. Category
- D. Catalog
Answer: A
Explanation:
A storage policy can be associated with a VM. A storage policy is a set of rules that define how data objects are stored and protected. It specifies the characteristics of storage, data protection, and data placement for virtual disks that are assigned to a VM. Subnets, catalogs, and categories are not associated with storage policies.https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-vpc_2022_6:mul-cluster-storage-policy-summary-view-pc-r.html
NEW QUESTION # 70
When a configuring a syslog server in Prism Central, what two pieces information are required? (Choose two.)
- A. IP address/port
- B. Transport protocol
- C. Encryption secret
- D. HTTPS URL
Answer: A,B
Explanation:
According to the Nutanix Prism Central Guide, to configure a syslog server in Prism Central, you need to specify the transport protocol (TCP or UDP) and the IP address/port of the syslog server.
NEW QUESTION # 71
What is the expected operation during node addition when the new node has a different AOS version?
- A. The node is automatically re-imaged using the software currently running in the cluster.
- B. The node is added and a separate upgrade operation must be performed.
- C. The entire cluster is upgraded to the latest one-click release.
- D. The addition fails and forces the administrator to image using standalone Foundation.
Answer: A
Explanation:
The node is automatically re-imaged using the software currently running in the cluster. This is because Nutanix supports a feature called Auto Re-Image that allows adding nodes with different AOS versions to an existing cluster without manual intervention. The Auto Re-Image feature detects the AOS version mismatch and automatically downloads and installs the same AOS version as the cluster on the new node. This ensures that the cluster remains in a consistent state and avoids any compatibility issues.
NEW QUESTION # 72
The customer is seeing high memory utilization on a mission critical VM. Users report that the application is unavailable. The guest OS does not support hot add components.
How should the administrator fix this issue?
- A. Go to Control Panel in the VM:
*Select the Computer Properties
*Increase the amount of RAM assigned - B. Access the CVM on the host that is running the VM:
*Open acli
*Run a command to increase the amount of RAM assigned to the VM - C. From the Prism web console:
*Go to the VM dashboard
*Select the VM from the VMs list
*Choose Update
*Adjust the amount of memory assigned to the VM - D. During the next maintenance window:
*Select the VM from the VMs list
*Perform a graceful shutdown
Answer: C
Explanation:
The best way to fix this issue is to increase the amount of memory assigned to the VM from the Prism web console. This option allows the administrator to modify the VM configuration without accessing the CVM or shutting down the VM. The Prism web console provides a simple and intuitive interface for managing Nutanix clusters and VMs1. To change the memory allocation for a VM, the administrator can follow these steps2:
Go to the VM dashboard
Select the VM from the VMs list
Choose Update
Adjust the amount of memory assigned to the VM
Click Save
NEW QUESTION # 73
An administrator notices that most of the VMs in the cluster are on one host. Users report that an application seems to respond slowly. The application server VM has significantly more memory assigned to it than other VMs.
How should the administrator fix this issue?
- A. Increase the memory on the CVM.
- B. Migrate the VM to a different host.
- C. Add more memory to the VM.
- D. Reduce the amount of memory assigned to the VM.
Answer: B
NEW QUESTION # 74
An administrator was reviewing various AOS logs when a it was noticed that the time of the logs were off by several hours.
Which initial step was missed during the post process cluster configuration?
- A. Setting the cluster time zone via PE GUI
- B. Setting the cluster time zone via PC GUI
- C. Setting the cluster time zone via CVM ACLI
- D. Setting the cluster time zone via CVM NCLI
Answer: D
NEW QUESTION # 75
Which two methods are available when migrating a VM from a legacy 3-tier solution using VMware ESXi to AHV? (Choose two.)
- A. Use shared nothing live migration.
- B. Import the .vmdk into the Image Service.
- C. Use Cross-Hypervisor DR.
- D. Deploy the Move appliance.
Answer: B,D
Explanation:
Deploy the Move appliance and Import the .vmdk into the Image Service. These are two methods that can be used to migrate a VM from VMware ESXi to AHV2. The Move appliance is a tool that automates the migration process by converting the VM disks and configuration to AHV format and transferring them to the Nutanix cluster3. The Image Service is a feature that allows users to upload and manage disk images that can be used to create or clone VMs on AHV4. By importing the .vmdk file of the VMware VM into the Image Service, users can create a new AHV VM from that image.
NEW QUESTION # 76
......
The NCP-MCI-6.5 certification is highly regarded in the IT industry and is a valuable asset for IT professionals who want to advance their careers in cloud computing and infrastructure management. It demonstrates a candidate's proficiency in managing Nutanix infrastructure across multiple cloud environments, and validates their skills and knowledge in designing, deploying, and maintaining complex IT environments.
Passing Key To Getting NCP-MCI-6.5 Certified Exam Engine PDF: https://www.latestcram.com/NCP-MCI-6.5-exam-cram-questions.html
NCP-MCI-6.5 Exam Dumps Pass with Updated Tests Dumps: https://drive.google.com/open?id=1xjDORa3juPrVhuQw8mpV3n_ncMjQRs4M
