Authentic Best resources for 300-435 Test Engine Practice Exam
[2021] 300-435 PDF Questions - Perfect Prospect To Go With LatestCram Practice Exam
NEW QUESTION 50
Refer to the exhibit.
A Python script must be created to deactivate vSmart Policy Cisco SD-WAN vManage Configuration APIs. The documentation states the URL is as shown in the exhibit for this REST call using POST, and that "policyId" is a required request parameter. Which line of Python code makes this call, assuming the variable "s" is a valid Requests session object and the variable "policy-id" is the policyId?
- A. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate/%s' % policy_id)
- B. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate/', data = {'policyId': policy_id})
- C. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate?policyId=%s' % policy_id)
- D. s.port('https://vmanage:8443/dataservice/template/policy/vsmart/activate&policyId=%s' % policy_id)
Answer: A
NEW QUESTION 51
The Cisco DNA Center Sites API must be used to add a device to a site, but only the site name is available. Which API call must be used to retrieve the site identifier so that the device can be properly added to the network?
- A. /dna/intent/api/v1/site/siteName
- B. /dna/intent/api/site
- C. /dna/intent/api/v1/site
- D. /dna/intent/api/site/siteId
Answer: C
NEW QUESTION 52
Which two features are foundations of a software-defined network instead of a traditional network? (Choose two.)
- A. control plane and data plane are tightly coupled
- B. requires device by device-level configurations
- C. automated through expressed intent to a software controller
- D. build upon a robust software stack
- E. requires significant physical hardware resources
Answer: C,D
Explanation:
Section: Network Programmability Foundation
Explanation:
In traditional networks, control plane and data plane are coupled tightly. It also requires device by device configurations and of course, it uses physical hardware resources to function. Whereas, SDN is based on a software stack. In Cisco SDNs are automated through expressed intent to a software controller.
NEW QUESTION 53
Refer to the exhibit.
Which interface is included in the payload resulting from the script?
- A. ethernet 100
- B. ethernet 1/1
- C. ethernet 1
- D. ethernet 0
Answer: D
NEW QUESTION 54
Drag and drop the code from the bottom onto the box where the code is missing in the Ansible playbook to apply the configuration to an interface on a Cisco IOS XE device. Not all options are used.
Answer:
Explanation:
NEW QUESTION 55
When the Cisco DNA Center Intent API is used as part of an automation process, what prompts receiving a HTTP 206 status code on a call?
- A. The client request was successful, but there is no content associated with the request
- B. The client made a request that has been received but not yet acted upon
- C. The client authentication credentials that are included with the request are missing or invalid
- D. The client made a request for partial content matching a range header
Answer: D
Explanation:
Section: Cisco DNA Center
NEW QUESTION 56 
Refer to the exhibit. Drag and drop the code from the bottom onto the box where the code is missing to complete the ncclient request that captures the operational data of the interfaces of a Cisco IOS XE device. Options may be used once, more than once, or not at all.
Answer:
Explanation:
NEW QUESTION 57
What are two characteristics of RPC API calls? (Choose two.)
- A. They can be used only on network devices.
- B. They use only UDP for communications.
- C. They call a single function or service.
- D. They must use SSL/TLS.
- E. Parameters can be passed to the calls.
Answer: A,E
Explanation:
Section: Network Programmability Foundation
Explanation/Reference: https://pubs.opengroup.org/onlinepubs/9629399/chap6.htm
NEW QUESTION 58
Which field must be completed in Cisco DNA Center when a network discovery is initiated?
- A. SNMP read community string
- B. Enable password
- C. NETCONF port
- D. Discovery type
Answer: D
NEW QUESTION 59
Which two Netmiko methods are used to configure a device? (Choose two.)
- A. send_config()
- B. send_control_from_file()
- C. send_command()
- D. send_config_set()
- E. send_config_from_file()
Answer: C,D
NEW QUESTION 60
Which curl command is used to update the SNMP community of network ID "1234567" to read-only?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: B
Explanation:
PUT is used to update the snmp network ID. The access has to be community and not users. Therefore, option B is correct.
NEW QUESTION 61
Refer to the exhibit.
The goal is to write a Python script to automatically send a message to an external messaging application when a rogue AP is detected on the network. The message should include the broadcast SSID that is in the alert. A function called "send_to_application" is created, and this is the declaration:
send_to_application(message)
The exhibit also shows the data that is received by the application and stored in the variable return_val. Which Python code completes the task?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: B
Explanation:
Explanation
For number in range value is required for the application to send the alert. Bssids are also included.
NEW QUESTION 62
Which two Netmiko methods are used to configure a device? (Choose two.)
- A. send_config_from_file()
- B. send_config()
- C. send_control_from_file()
- D. send_command()
- E. send_config_set()
Answer: A,E
Explanation:
Section: Network Device Programmability
Explanation/Reference:
Reference: https://pynet.twb-tech.com/blog/automation/netmiko.html
NEW QUESTION 63
Which two features are foundations of a software-defined network instead of a traditional network? (Choose two.)
- A. control plane and data plane are tightly coupled
- B. requires device by device-level configurations
- C. automated through expressed intent to a software controller
- D. build upon a robust software stack
- E. requires significant physical hardware resources
Answer: C,D
Explanation:
Explanation
In traditional networks, control plane and data plane are coupled tightly. It also requires device by device configurations and of course, it uses physical hardware resources to function. Whereas, SDN is based on a software stack. In Cisco SDNs are automated through expressed intent to a software controller.
NEW QUESTION 64
Which curl command is used to update the SNMP community of network ID "1234567" to read-only?
- A. Option D
- B. Option B
- C. Option A
- D. Option C
Answer: B
Explanation:
Explanation
PUT is used to update the snmp network ID. The access has to be community and not users. Therefore, option B is correct.
NEW QUESTION 65
Refer to the exhibit.
What is the result when running the Python scripts?
- A. s3
- B. s1, s2, s3
- C. s1
- D. s2
Answer: D
Explanation:
NEW QUESTION 66
......
Best updated resource for 300-435 Online Practice Exam: https://www.latestcram.com/300-435-exam-cram-questions.html
Realistic Practice 300-435 Automating and Programming Cisco Enterprise Solutions Exam Braindumps: https://drive.google.com/open?id=1ER1BPTE_0xk3numUquPDoW42rQW1BoE5
