100% Pass Top-selling 5V0-42.21 Exams - New 2022 VMware Pratice Exam
VMware SD-WAN Design and Deploy 2021 Dumps 5V0-42.21 Exam for Full Questions - Exam Study Guide
VMware 5V0-42.21 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
| Topic 10 |
|
| Topic 11 |
|
NEW QUESTION 29
A customer is looking to have Quality of Service (QoS), resource allocations, link/path steering, and error correction applied automatically based on applications.
Which component of VMware SD-WAN helps the customer achieve this requirement?
- A. Business Policy Framework
- B. Overlay Flow Control
- C. Branch Site Topologies
- D. High Availability Configuration
Answer: A
NEW QUESTION 30
Which statement is true about the VMware SD-WAN Gateway roles and assignments?
- A. If the Primary Gateway goes down. Cloud internet traffic would failover to Secondary gateway automatically
- B. The SD-WAN Orchestrator assigns the Gateways to the Edge automatically when it comes up based Oil (lie location of the Edge Branch-to-branch will choose the right Gateway automatically
- C. The Primarily and Secondary Gateways share the load fur both internet traffic and VPN traffic
- D. Primary Gateway cannot be used as Super gateway for Edge-to-Edge communication, even it all the Edges have a common Primary gateway
Answer: D
NEW QUESTION 31
A customer is using hypervisor to install VMware Partner Gateways.
Which two hypervisors may be used? (Choose two.)
- A. Kubermetes
- B. XenServer
- C. ESXi
- D. KVM
- E. Hyper-V
Answer: D,E
NEW QUESTION 32
A service provider assigns two Partner Gateways to a VMware SD-WAN Edge.
Which description is correct about default route.
- A. When handoff is turned off on a Partner Gateway, the Gateway does not advertise a default route 0.0
0.0/0 to the Edge. - B. The service provider administrator decides whether the Partner Gateway advertises a default route
0.0.0.0/0 or not, although it is advertised by default. - C. A default route 0.0.0.0/0 can be configured as a static route and set to NAT only on the Gateway
- D. It default route 0 0 0.010 has been configured for both Gateways, internet traffic originated from the Edge can failover to the other Gateway in case of a Gateway failure.
Answer: C
NEW QUESTION 33
Which characteristic of Software Defined Networks (SDN) is also true for VMware SD-WAN
- A. VMware SD-WAN provides separation of management control plane, and the data plane.
- B. VMware SU-WAN allows customers to program the forwarding plane
- C. VMware SD-WAN requires specialized hardware to run its software
- D. VMware SD -WAN provides distributed management and control plane
Answer: C
NEW QUESTION 34
Which VMware SD-WAN component Is responsible for overlay route distribution?
- A. VMware SD-WAN Hub
- B. VMware SD-WAN Edge
- C. VMware SD-WAN Controller
- D. VMware SD-WAN Orchestrator
Answer: C
NEW QUESTION 35
A customer would like to ensure that the traffic towards the Partner Gateway does not exceed a certain bandwidth.
Which feature should be used?
- A. Modify the SD WAN Traffic Class and Weight Mapping
- B. Enable the rate limit under a new custom Business Policy Rule.
- C. Change the application priority to low.
- D. Enable the SD-WAN Overlay Rate-Limit.
Answer: C
NEW QUESTION 36
Which feature is required to prevent a split-brain condition for a branch in an Enhanced HA
- A. VRRP
- B. SD-WAN Service Reachable on the private overlay
- C. Split Brain Detection
- D. Cloud VPN
Answer: B
NEW QUESTION 37
A customer is migrating a branch site with a VMware SD-WAN Edge coexisting with the CE. The Edge will be connected to internet link directly while connecting to the CE via a Layer 3 LAN switch.
MPLS underlay is the preferred path for communication from this site to branch sites that have no VMware SD-WAN Edges. Communication from this site to branch sites that have VMware SD-WAN Edges should go through overlay.
- A. Use BGP as the rout.ng protocol on UK Edge and flag its BGP neighbor to the Layer 3 LAN switch as Uplink.
- B. Use BGP as the routing protocol on the Edge and filter prefixes from CE using Uplink Community
- C. Use BGP as the routine, protocol on the Edge and flag its BGP neighbor to GE as Uplink.
- D. Use BGP as the routing protocol on the Edge and flag its HGP neighbor to PE as Uplink.
Answer: D
NEW QUESTION 38
A service provider wants to offer a common service from its data center via VMware SD-WAN Partner Gateway to many customers with overlapping IP addresses.
Which configuration must be implemented?
- A. Define multiple segments tor each customer
- B. Enable tag type QinQ under hand off interface configuration
- C. Configure source policy-based NAT under business- policies configuration
- D. Enable NAT hand off under hand off static routes configuration
Answer: A
NEW QUESTION 39
A customer is using Office 365.
How would the VMware SD-WAN recognize this application correctly?
- A. Office 365 has to be added as part of customizing the Application Map by TCP/UDP port and subnet ranges.
- B. The VCE supports prioritization and QoS. Each application is assigned one of the three Service Classes and three Business Priorities.
- C. VMware SD-WAN will use SSL inspection to detect Office 365.
- D. Top SaaS Apps (TLS encrypted) are identified using put. IP and port ranges Other TLS traffic can be identified based on the certificate information.
Answer: C
NEW QUESTION 40
An administrator has been receiving complaints about their SaaS business collaboration apps.
Which network service should the administrator use to resolve the issue?
- A. Multi-Path
- B. Direct
- C. Backhaul
- D. CoS mapping
Answer: B
NEW QUESTION 41
Refer to the exhibit.
An MSP is designing a solution for a merger of Customer A and Customer B to Customer A's enterprise. Due to overlapping IP addresses and security requirements, the segments with the same names between Customer A and Customer A cannot be merged.
Based on the graphic and the requirements, how many new segments need to be configured in the VMware SD-WAN Orchestrator?
- A. 4 segments
- B. 5 segments
- C. 6 segments
- D. 2 segments
Answer: B
NEW QUESTION 42
A technician needs to SSH to it VMware SU-WAN Virtual Edge runningversion 3.3.2. What is the default password?
- A. velocloud
- B. adnim
- C. Password configured in cloud_init
- D. No password required
Answer: C
NEW QUESTION 43
An Enterprise customer just acquired a new company, and the Network Enterprise administrator was tasked to integrate over 20 new branches into their existing SD-WAN network. However, these branches have overlapping IPs with the existing branches subnets.
- A. Configure a LAN-side NAT rule at the branchdevice settings, translating its subnets into a new non-overlapping subnet
- B. Configure a NAT hand off rule at the VMware SD WAN gateway assigned to these new blanches, translating the new branch subnets into a new nan-overlappingsubnet
- C. Configure a policy based NAT tor each branch translating its subnets Into a new non-overlappingsubnet
- D. Configure a NAT firewall rule in each branch, translating itssubnets into a new non-overlapping subnet
Answer: A
NEW QUESTION 44
Which deployment model ensures that management and control plane is cloud-delivered while data continues to flow on-premises between VMware SD-WAN nodes that remain on-premises?
- A. Hosted SD-WAN Orchestrator/Controller
- B. Partially on-premises
- C. On-premises SD-WAN Orchestrator/Controller
- D. All on-premises
Answer: D
NEW QUESTION 45
What is considered a typical VMware SD-WAN use case?
- A. Provide management, control plane, and data forwarding from a single system to reduce complexly for the network administrator.
- B. Provide high speed layer 2 data center interconnects.
- C. Provide cloud delivered central management Orchestrator toimplementcomplex design network integration options.
- D. Provide a distributed (per device) commands line interface (CLI) based configurations to implement complex network designintegrationoptions.
Answer: A
NEW QUESTION 46
A MSP partner needs to setup a Partner Gateway and configure the Handoff Interlace.
Which are the valid configuration options for the Tag type?
- A. None, 802 1q. 802_1ac, and Qin(0x8100) / QinQ(0x9100)
- B. None. 802. 1q. 802, 1 ad, arid QinQ(0x8100) / QinQ(0x9100)
- C. None, 802 1q, 802 3ad, and QinQ(0x8100) / QinQ(0x9100)
- D. None, 802 1d, 802.1ad, and QinQ(0x8100)/ QinQ(0x9100)
Answer: B
NEW QUESTION 47
A network architect from a service provider is designing an architecture using a VMware SD-WAN Partner Gateway handoff.
Which dynamic routing protocol should the engineering choose?
- A. OSPF
- B. BGP
- C. RIP Version 2
- D. Static
Answer: C
NEW QUESTION 48
A technician at a customer site is deploying VMware SD-WAN Edge 620 notices that the Edge LED is shown amber.
What is the meaning of this LED color?
- A. Edge is still booting.
- B. DNS is not reachable from the Edge.
- C. Internet is not available from the Edge
- D. Edge is not activated.
Answer: C
NEW QUESTION 49
Which statement describes a characteristic of VMware SU-WAN Edge (VCL) clustering?
- A. VCF clusters member sync flow tables between themselves.
- B. A VCE cluster requires one dedicated interface for HA sync
- C. One VCE cluster can be formed with both virtual and hardware at the same lime
- D. VCE cluster members should have unique IP addresses on its WAN interfaces
Answer: A
NEW QUESTION 50
......
Authentic Best resources for 5V0-42.21 Online Practice Exam: https://www.latestcram.com/5V0-42.21-exam-cram-questions.html
